Bowling Mechanic - Ladgov Corporation

Position Title: Bowling Technician

Location: Patrick Space force Base

RoutineLaneMaintenanceServices

General: The applicant shall be responsible for performing and documenting preventive lane maintenance services.

1. Dailypreventivemaintenanceshallincludethe following and shall be documented on the checklist provide in Appendix A:

• • Checkcallsheetsforthepreviousday and transfer calls to stop summary

• • Cycle/checkmachines,foullightsandrelatedequipment
  • Investigate/correctmachinesthathavedevelopedamalfunctionpattern

• • Cleanballliftanddistributorbelts

• • Cleanpinelevator

Cleanpinguideandorientorpan

Keepworkarea,workbenchandserviceisle clean & orderly

Assignandrecordpreventivemaintenanceonthepreventivemaintenance charts

Weeklypreventivemaintenanceshallincludethe following and shall be documented on the checklist provide in Appendix A:

Cleanshuttleandbin

Clean,checkballdoorexit,liftarm,paddle,LBSoperation

Cleanballliftassembly,liftrods

Cleanpitcarpetbelt

Cleanpincurtain,cushion,drippans

Tightenplows,checkforcracksandreplaceasneeded

Changeballwipes

Cleanbowlingpins

Inspectdistributor,observeforproperoperationandcorrectas needed

1. Monthlypreventivemaintenanceshallincludethe following and shall be documented on the checklist provide in Appendix A:

• • Check,clean,correct,adjust,spottingcups,respot cells, and table assembly in general.

• • Check,cleancorrectadjust,sweepassembly

• • Check,clean,correctballtracks,down sweeps

• • Check,correct,adjustcarpetbelttracking,frontand rear rollers

• • Check,correct,adjustbounceboard,dampers,supports,groundstrap

• • Check,correct,adjustcushionassemblyand shock

• • Blowoutsweepandtablebrakes

• • Check all machine belts, replace asneeded

• • Clean distributorassembly

1. Quarterlypreventivemaintenanceshallincludethe following and shall be documented on the checklist provide in Appendix A:

• • Cleanthemachineframework,drippans

• • Completequarterlylubricationitems

• • Tightenfrontandrearjackscrews

• • Tighten pin cushion and hangar boxbolts

• • Remove distributor clutch assembly. Clean the pinion and sleeve, friction disks metal and plastic. Use fine emery cloth to smooth friction disk. Lubricate pinion and sleeve and reassemble.

• • Check:pinholderbrackets,shuttlestraps,shuttle operator rod. Repair as needed. Tighten shuttle bolts.

1. Yearly preventive maintenance shall include the following and shall be documented on the checklist provide in Appendix A. Check the following for worn or broken parts, repair or replace as needed:

• • Tableandsweeparms,shaftbushings,keywaysandpillow blocks

• • Completeannuallubechartitems

• • Check/correctgearboxoilleaksandchangeoil

• • Rebuildtabledrive

• • Rebuildcarpetrollerandpitassembly

• • Rebuilddistributorassembly

• • Rebuild ball lift assembly, light ballsensor

• • Cleanundergroundreturntracks,tightendown sweep track

1. RoutineLaneMachineServices

4.1 General: The contractor shall be responsible for performing and documenting lane machine services as shown below:

1. Dailypreventivemaintenanceshallincludethe following and shall be documented:

• • Using a clean cloth, wipe down the entire length of the power cord

• • Completely wipe down oil compartment. Do not clean the transfer brush or buffing brush unless needed

• • Cleandrippadsoneachsideofthemachineintheoilcompartment

• • Clean the drive, lane distance and momentary wheels. Dust & lint shall not be allowed to build up

• • Wipe squeegee clean & inspect for wear. An extra set of blades must be kept on-site as a backup and must be stored in a dark cool space

• • Wipedown frontofthemachine

• • Wipeoffoutsideofthemachine

1. Monthlypreventivemaintenanceshallincludethe following and shall be documented:

• • Usingcompressedair,removedustfromallsurfaces

• • Inspect recovery tank filter. Replace as specified in Appendix 3 or as needed

• • Cleanlintfromtransferbrushandcleanbetweenbrushes

• • Replace duster cloth if required. If the duster cloth is changed clean the entire cleaning compartment and lube the cleaner head bar