Assembler 2nd Shift Fenton - Apidel Technologies

shift hours 2:15 12:45 am

M-TH 10 hr shifts

(Possible overtime does apply) 2:15 pm 12:45 am onSaturdays

The candidate will train on 1st Shift 6 am - 2:30 pm

OBTAIN WORK ORDER FROM YOUR LEAD PERSON.

CHECK THE BILL OF MATERIAL FOR DESCRIPTION, QUANTITY ANDPARTS NEEDED TO BUILD THE PRODUCT.

READ THE ROUTING CAREFULLY AND REPORT LABOR AGAINST THEPROPER SEQUENCE.

REVIEW THE WORK ORDER FOR ANY SPECIAL INSTRUCTIONS.  IF THE INSTRUCTIONS ARE UNCLEAR ,  ASK YOUR LEAD PERSON OR SUPERVISOR FOR CLARIFICATION.

REQUEST A PRODUCTION ASSEMBLY DRAWING  FROM YOUR LEAD PERSON, SUPERVISOR ORINSPECTOR WHEN ONE IS REQUIRED.

INSPECT ALL PARTS AS THEY ARE BEING USED.

FLANGES ( THE JOINT BETWEEN THE BODY AND COVER ) MUST BEINSPECTED 100% WITH A .0015 FEELER GAGE. THE GAGE CAN GO NO DEEPER THAN 1/8MAX.

CHECK FOR POROSITY, TORN THREADS, BAD PAINT, MISSINGFEATURES ETC.  PER INSTRUCTIONS FROM YOURROUTINGS, DRAWINGS, LEAD PERSON OR SUPERVISOR.

LUBRICATE ALL INDICATED THREADED AREAS.

REMOVE NONCONFORMING OR QUESTIONABLE MATERIAL TODESIGNATED AREAS UNTIL A DETERMINATION CAN BE MADE.

COMMUNICATE ANY PROBLEMS YOUR HAVING WITH THE ASSEMBLY (i. e., BAD PARTS, EQUIPMENT, FIXTURES, TOOLS, DRAWINGS OR UNCLEAR WORKINSTRUCTIONS) TO YOUR LEAD PERSON, SUPERVISOR OR INSPECTOR FOR CORRECTIVEACTION.

CLEAR YOUR WORK AREA AND PUT ALL CONSUMABLE PARTS INTHEIR PLACE AFTER COMPLETING EACH WORK ORDER.

RETURN SPECIAL TOOLS, EQUIPMENT AND DRAWINGS TO WHERETHEY BELONG.   

USE DOWN TIME CONSTRUCTIVELY:  FILL YOUR BINS WITH CONSUMABLE PARTS, CLEANYOUR AREA AND BE PREPARED FOR YOUR NEXT WORK ORDER OR INSTRUCTIONS.

ELECTRICAL WIRING BACKGROUND, AND ABLE TO LIFT UP TO 35lbs. continuously.