Automation Service Engineer at Engineering Resource Group
Mahwah, NJ 07430
About the Job
Description
Permanent position for an Automation Service Engineer to provide on-site engineering services including equipment FAT’s, commissioning, customer training, and validation support throughout the US, Canada and Puerto Rico.
Conduct and supervise field installation of controls, new or retrofit equipment, or prepare instructional installation documents to clients and project teams.
Troubleshoot, develop, test, and commission Allen Bradley PLC (ControlLogix, PLC-5, and SLC) control system applications using RSLogix.
Troubleshooting and customization of SCADA application code using WonderWare, Intellution.
Troubleshooting and configuration of non-SCADA HMI terminals.
Inspect, test, and release company control panels that are manufactured by outside vendors at their facility.
Act as a liaison to the customer when on-site, and effectively communicate project delays, scope changes, customer relationship issues, technical deficiencies, etc
to management.
Prepare labor summary forms and expense reports for all assigned projects.
Spearhead controls warranty issues for field work through the assigned Project Manager.
Document all activities through the execution of checklists, protocols, drawing markups, or written trip reports.
Provide feedback and design suggestions to the Process Automation department as appropriate.
Provide technical support to customers “in-house” in the form of telephone assistance and follow-up.
Track and continually monitor issues ensuring issue is properly addressed and resolved.
Remain current with emerging industry standards and products
Keep abreast of latest trends in software, instrumentation, and control system hardware.
Develop, maintain, and enhance positive interpersonal relationships with customers and staff members worldwide.
Requirements
BS Electrical Engineering
Experience with cGMP in and FDA regulated environment.
Minimum 3 years of experience with pneumatics, variable frequency drives, and Allen Bradley PLC’s.
Experience with Siemens PLCs and logic is a plus.
Ability to troubleshoot, develop, test, and commission PLC and SCADA (iFix and/or Wonderware) control systems.
Familiarity with industry standards such as NFPA, NEC, and NEMA.
Familiarity with electrical wiring practices and wiring troubleshooting required.
Programming experience with Allen Bradley and Siemens PLCs and WonderWare’s InTouch, Intellution’s iFIX, and HMI applications
Process instrumentation experience is a plus.
Experience developing and interpreting control system drawings including P&ID’s, control system schematics, control panel layout drawings.
Experience developing and interpreting pneumatic and electrical interconnect diagrams.
Knowledge of and experience in Microsoft Windows operating systems, Microsoft Office applications, and Microsoft Access and/or SQL Server.
Must be willing and be capable to climb ladders and to enter restrictive spaces.
Must possess a valid driver’s license and passport.
Overnight travel up to 60% (80% including local travel) or as needed to complete responsibilities.
Contact
Click Apply to job, or call me, Pat Mitchell, at
125
Job #: 21591-BZ-PM1
To view all of our job openings, visit:
careers.terkotech.com
#TTX
Permanent position for an Automation Service Engineer to provide on-site engineering services including equipment FAT’s, commissioning, customer training, and validation support throughout the US, Canada and Puerto Rico.
Conduct and supervise field installation of controls, new or retrofit equipment, or prepare instructional installation documents to clients and project teams.
Troubleshoot, develop, test, and commission Allen Bradley PLC (ControlLogix, PLC-5, and SLC) control system applications using RSLogix.
Troubleshooting and customization of SCADA application code using WonderWare, Intellution.
Troubleshooting and configuration of non-SCADA HMI terminals.
Inspect, test, and release company control panels that are manufactured by outside vendors at their facility.
Act as a liaison to the customer when on-site, and effectively communicate project delays, scope changes, customer relationship issues, technical deficiencies, etc
to management.
Prepare labor summary forms and expense reports for all assigned projects.
Spearhead controls warranty issues for field work through the assigned Project Manager.
Document all activities through the execution of checklists, protocols, drawing markups, or written trip reports.
Provide feedback and design suggestions to the Process Automation department as appropriate.
Provide technical support to customers “in-house” in the form of telephone assistance and follow-up.
Track and continually monitor issues ensuring issue is properly addressed and resolved.
Remain current with emerging industry standards and products
Keep abreast of latest trends in software, instrumentation, and control system hardware.
Develop, maintain, and enhance positive interpersonal relationships with customers and staff members worldwide.
Requirements
BS Electrical Engineering
Experience with cGMP in and FDA regulated environment.
Minimum 3 years of experience with pneumatics, variable frequency drives, and Allen Bradley PLC’s.
Experience with Siemens PLCs and logic is a plus.
Ability to troubleshoot, develop, test, and commission PLC and SCADA (iFix and/or Wonderware) control systems.
Familiarity with industry standards such as NFPA, NEC, and NEMA.
Familiarity with electrical wiring practices and wiring troubleshooting required.
Programming experience with Allen Bradley and Siemens PLCs and WonderWare’s InTouch, Intellution’s iFIX, and HMI applications
Process instrumentation experience is a plus.
Experience developing and interpreting control system drawings including P&ID’s, control system schematics, control panel layout drawings.
Experience developing and interpreting pneumatic and electrical interconnect diagrams.
Knowledge of and experience in Microsoft Windows operating systems, Microsoft Office applications, and Microsoft Access and/or SQL Server.
Must be willing and be capable to climb ladders and to enter restrictive spaces.
Must possess a valid driver’s license and passport.
Overnight travel up to 60% (80% including local travel) or as needed to complete responsibilities.
Contact
Click Apply to job, or call me, Pat Mitchell, at
(973) 490-7000
ext125
Job #: 21591-BZ-PM1
To view all of our job openings, visit:
careers.terkotech.com
#TTX
