CNC Technician - 2nd Shift - Neptune

CNC Technician position serves as an upper level of a CNC Operator. The CNC Operator is held to certain criteria as defined in the CNC Operator job description. The CNC Operator must meet these criteria along with the requirements listed below before he or she can be considered for the position of a CNC Technician.

SPECIFIC RESPONSIBILITIES:

1. Must be able to establish and set tool lengths, including oversize bars.
2. Must be able to establish fixed probe TRAM surface.
3. Must be able to calibrate spindle probe manually.
4. Must understand the controls of all machines.
5. Must have the ability to operate all machines.
6. Must be able to use shop math to figure depth of cut.
7. Must be able to make non-complex adjustments.
8. Must be able to read and understand program lines.
9. Must be able to make slight edits and tool adjustments.
10. Must be able to look at the condition of the cut and know how to remedy any problems.
11. Must be able to change tools and inserts.
12. Must be able to setup secondary operations where applicable.
13. Must be able to read and understand prints.
14. Must be able to use all measuring devices.
15. Use of assembly fixtures, drill press, Arbor press, air hoses, miscellaneous hand tools, air dryer, ratchets, hammer, vise, manual material handling devices, lift tables, roller conveyers, and hoists.
16. Must be able to make radical edits to programs if required.
17. Must be able to troubleshoot machine problems.
18. Must have knowledge of simple trigonometric functions related to setup of parts and edits to programs.
19. Maintain a working knowledge of feeds / speeds and the ability to determine chip loads.
20. Must demonstrate good problem solving abilities related to the machines and parts utilized within the department.
21. Must aide in the development of the CNC operators in relation to the requirements of their position.
22. Must aide in the scheduling of the department.
23. Must work closely with the departmental supervisor by communicating conditions of inventory, quality, machine performance, and maintenance issues.
24. Must have a working knowledge of programming in machine language.

 

MINIMUM REQUIREMENTS:

Must have 2 years technical school and a minimum of 1 year of experience or the equivalent knowledge.

Location: Tallassee, AL

Competitive Compensation and Benefits.

• Paid Holidays & Vacation
• 401(k) Savings Plan
• Employee Stock Purchase Plan (Roper Technologies)
• Comprehensive Health, Vision, and Dental Insurance Packages
• Employee Health, Wellness, and Safety Programs
  • Neptune Health & Wellness Center available onsite to Neptune employees residing in Alabama who are enrolled in Neptune’s Medical & their covered spouse & dependents.
    • All preventative care services covered at 100%
    • Onsite dispensary with select generic medications
    • Lower than average wait times for an appointment with convenient appointment scheduling options
  • Early Intervention and Injury Prevention Plan with Therapy South onsite
    • Team of athletic trainers and physical therapists providing wellness education, early interventions, injury care, and safety training.
    • Proactive approach to deal with work-related, as well as nonwork-related discomfort.
  • Tuition Assistance
  • Training and Education Programs

Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities
The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. 41 CFR 60-1.35(c) Operations