CVD Operator/Heat Treat - Parker Hannifin Corporation
Akron, OH
About the Job
CVD Operator/Heat Treat
Location : Akron, OH, United States
Job Family : Manufacturing
Job Type : Regular
Posted : Sep 27, 2024
Job ID : 52228
Back to Search Results
Job Description
Apply Now >
Save JobJob Saved
Job Designation
The CVD Operator/Heat Treater's job consists of the use of Chemical Vapor Deposition (CVD), heat treat, and other high temperature resistance and induction heated vacuum furnaces, autoclaves, and ovens consistent with the manufacturing of carbon brakes and related carbon/carbon products. Furnaces may be used for carbonization, pyrolysis, heat treat, CVD, and other heating processes needed to control the life, hardness, density, or other required characteristics of carbon/carbon products.
Job Core Responsibilities
+ Load and unload carbon products onto trees, diffuser plates, modules, or other similar devices used as platforms, containers, or racks in the furnaces.
+ Assemble and disassemble trees, diffuser plates, and modules before and after each process.
+ Responsible for the safe operation of elevators, overhead cranes, mules, and prime movers (excluding tow motors). This equipment may be used during the loading and unloading of furnaces or the removal and replacement of furnace caps, tops, and doors or as other needs require.
+ Retrieve and return carbon products or assemblies such as module parts for heat treat or CVD processing from holding, staging queues, storage racks within the specified furnace and heat treat areas.
+ Required to clean nitrogen vent ports, furnace flange, or other furnace components as needed using approved methods of cleaning prior to each operation of furnace and will be required to change vacuum filters and apply vacuum grease as required.
+ Remove and replace all carbon black within the furnace before and after each process as required. Will also perform all functions relating to the extraction, containment, and replacement of used, graphitized carbon black when necessary.
+ Prepare furnaces and equipment for vacuum operations, activate and deactivate vacuum pumps and perform any and all leak checks as required for safe and efficient operation of furnaces.
+ Monitor and record all temperature, pressure, power, and gas flow meters and gages. Adjust appropriate settings and flow rates consistent with defined parameters and is responsible for maintaining all parameters throughout heating and cooling cycles.
+ Operator is responsible for the proper operations of furnaces and will immediately notify a member of supervision when equipment warning devices are triggered or equipment is not functioning properly.
+ Use of Statistical Process Control (SPC) methods are required to verify production processes and product quality. The Inspector (P-1582 classification) will validate the process.
+ After training, CVD/Heat Treat operator must be able to interpret drawings, sketches, and follow specific detailed technical instructions, and any relative communications.
Job Specifications
Education: A high school diploma or equivalent is required. Vocational training in Mechanics or Electronics is preferred.
Required Experience: Minimum of 1-2 years' previous experience working in a manufacturing shop floor environment
Skills:
+ Able to operate a variety of hand tools and machinery
+ Ability to read and interpret company documents, such as safety rules, operating/manufacturing instructions, policies and procedures
+ Ability to operate a tow motor
+ Capable of recognizing and solving typical problems that can occur in own work area; evaluates and selects solutions from established options
+ Effective oral, written and interpersonal skills
+ SECOND SHIFT position, will train on first shift (days) for 30 days.
Education: A high school diploma or equivalent is required. Vocational training in Mechanics or Electronics is preferred.
Required Experience: Minimum of 1-2 years' previous experience working in a manufacturing shop floor environment
Skills:
+ Able to operate a variety of hand tools and machinery
+ Ability to read and interpret company documents, such as safety rules, operating/manufacturing instructions, policies and procedures
+ Ability to operate a tow motor
+ Capable of recognizing and solving typical problems that can occur in own work area; evaluates and selects solutions from established options
+ Effective oral, written and interpersonal skills
+ SECOND SHIFT position, will train on first shift (days) for 30 days.
Location : Akron, OH, United States
Job Family : Manufacturing
Job Type : Regular
Posted : Sep 27, 2024
Job ID : 52228
Back to Search Results
Job Description
Apply Now >
Save JobJob Saved
Job Designation
The CVD Operator/Heat Treater's job consists of the use of Chemical Vapor Deposition (CVD), heat treat, and other high temperature resistance and induction heated vacuum furnaces, autoclaves, and ovens consistent with the manufacturing of carbon brakes and related carbon/carbon products. Furnaces may be used for carbonization, pyrolysis, heat treat, CVD, and other heating processes needed to control the life, hardness, density, or other required characteristics of carbon/carbon products.
Job Core Responsibilities
+ Load and unload carbon products onto trees, diffuser plates, modules, or other similar devices used as platforms, containers, or racks in the furnaces.
+ Assemble and disassemble trees, diffuser plates, and modules before and after each process.
+ Responsible for the safe operation of elevators, overhead cranes, mules, and prime movers (excluding tow motors). This equipment may be used during the loading and unloading of furnaces or the removal and replacement of furnace caps, tops, and doors or as other needs require.
+ Retrieve and return carbon products or assemblies such as module parts for heat treat or CVD processing from holding, staging queues, storage racks within the specified furnace and heat treat areas.
+ Required to clean nitrogen vent ports, furnace flange, or other furnace components as needed using approved methods of cleaning prior to each operation of furnace and will be required to change vacuum filters and apply vacuum grease as required.
+ Remove and replace all carbon black within the furnace before and after each process as required. Will also perform all functions relating to the extraction, containment, and replacement of used, graphitized carbon black when necessary.
+ Prepare furnaces and equipment for vacuum operations, activate and deactivate vacuum pumps and perform any and all leak checks as required for safe and efficient operation of furnaces.
+ Monitor and record all temperature, pressure, power, and gas flow meters and gages. Adjust appropriate settings and flow rates consistent with defined parameters and is responsible for maintaining all parameters throughout heating and cooling cycles.
+ Operator is responsible for the proper operations of furnaces and will immediately notify a member of supervision when equipment warning devices are triggered or equipment is not functioning properly.
+ Use of Statistical Process Control (SPC) methods are required to verify production processes and product quality. The Inspector (P-1582 classification) will validate the process.
+ After training, CVD/Heat Treat operator must be able to interpret drawings, sketches, and follow specific detailed technical instructions, and any relative communications.
Job Specifications
Education: A high school diploma or equivalent is required. Vocational training in Mechanics or Electronics is preferred.
Required Experience: Minimum of 1-2 years' previous experience working in a manufacturing shop floor environment
Skills:
+ Able to operate a variety of hand tools and machinery
+ Ability to read and interpret company documents, such as safety rules, operating/manufacturing instructions, policies and procedures
+ Ability to operate a tow motor
+ Capable of recognizing and solving typical problems that can occur in own work area; evaluates and selects solutions from established options
+ Effective oral, written and interpersonal skills
+ SECOND SHIFT position, will train on first shift (days) for 30 days.
Education: A high school diploma or equivalent is required. Vocational training in Mechanics or Electronics is preferred.
Required Experience: Minimum of 1-2 years' previous experience working in a manufacturing shop floor environment
Skills:
+ Able to operate a variety of hand tools and machinery
+ Ability to read and interpret company documents, such as safety rules, operating/manufacturing instructions, policies and procedures
+ Ability to operate a tow motor
+ Capable of recognizing and solving typical problems that can occur in own work area; evaluates and selects solutions from established options
+ Effective oral, written and interpersonal skills
+ SECOND SHIFT position, will train on first shift (days) for 30 days.
Source : Parker Hannifin Corporation