Engineer - Mechanical Sr - Moseley Technical Services, Inc.
Kent, WA
About the Job
Check out this new opportunity!
Sr Fluids/Mechanical Design Engineer - Tubing
Various Locations
Contract Position
$79.53 - $96.23/Hour
Responsibilities:
* Design of various pressure vessel types, and shapes to accommodate vehicle space allocation and integration envelope.
* Design of fluid lines and flex elements for cryogenic and space application.
* Drawing generation, including tolerance and GD&T setup.
* Ownership of design release cycle, including drawings release, and DFM reviews.
* Analysis of primary and secondary spacecraft pressure vessels
* Integration of structural analysis with loads and dynamics environments
* Finite Element Model development, refinement, validation, and correlation to tests
* Strength checks and analysis report generation
* Test and verification plan and report generation
* Support configuration development and trade studies
Qualifications:
* Bachelor's degree in Mechanical, Aerospace, or Civil Engineering
* 8+ years of experience in the prediction/validation of low and/or high-frequency structural dynamics and loads, in addition to finite element modeling
* Solid foundation of structural static/dynamic fundamentals
* Passion for spacecraft structural/environmental loads development/validation
* Ability to solve a variety of static and dynamic structural problems using physics-based analytical methods (hand calculations, in-house tools, and 3rd party commercial analytical tools)
* Ability to earn trust, maintain positive and professional relationships, and contribute to a culture of inclusion
* Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum
* Experience with aircraft, spacecraft, launch vehicles, or automotive in some of the following areas:
* External loads
* Vibro-acoustic analysis
* Thermal Loading
* Analysis using Nastran, Ansys, Abaqus, LS-Dyna, or Opti-struct
* Preferred Qualifications
* COPV Pressure Vessel design and analysis
* Metallic Pressure Vessel design and analysis
* Fluids Lines design and analysis
* Flex Elements design and analysis
* Composite design and analysis skills in any thermoset, thermoplastic, metal matrix and ceramic matrix composites
* Manufacturing methods, material selection, testing, characterization & allowable development
* Experience testing materials, joints, components and vehicles
* Structural optimization using standard industry codes (Optistruct, HyperSizer, Nastran Sol 200, etc)
* Experience with ProEngineer Wildfire 4 / Creo Parametric or greater
* Experience with ProEngineer Wildfire 4 / Creo Parametric or greater piping / routing module
* Experience with Human spaceflight
* Experience with composites
* Experience with AIAA S-080 and S-081
* Experience with EJMA Ninth and Tenth Edition
Your Recruiter
Still have questions? Reach out to
Brian- (phone) (256) 213-1261 (email) [brian.videtic@moseleytechnical.com]{target="_blank" rel="noopener"}
What to Expect
* Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
* Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.
Resources
To apply, send resume to: [resumes@moseleytechnical.com]{target="_blank" rel="noopener"}
For more active job openings: [http://www.moseleytechnical.com](http://www.moseleytechnical.com/){target="_blank" rel="noopener"}
<
Sr Fluids/Mechanical Design Engineer - Tubing
Various Locations
Contract Position
$79.53 - $96.23/Hour
Responsibilities:
* Design of various pressure vessel types, and shapes to accommodate vehicle space allocation and integration envelope.
* Design of fluid lines and flex elements for cryogenic and space application.
* Drawing generation, including tolerance and GD&T setup.
* Ownership of design release cycle, including drawings release, and DFM reviews.
* Analysis of primary and secondary spacecraft pressure vessels
* Integration of structural analysis with loads and dynamics environments
* Finite Element Model development, refinement, validation, and correlation to tests
* Strength checks and analysis report generation
* Test and verification plan and report generation
* Support configuration development and trade studies
Qualifications:
* Bachelor's degree in Mechanical, Aerospace, or Civil Engineering
* 8+ years of experience in the prediction/validation of low and/or high-frequency structural dynamics and loads, in addition to finite element modeling
* Solid foundation of structural static/dynamic fundamentals
* Passion for spacecraft structural/environmental loads development/validation
* Ability to solve a variety of static and dynamic structural problems using physics-based analytical methods (hand calculations, in-house tools, and 3rd party commercial analytical tools)
* Ability to earn trust, maintain positive and professional relationships, and contribute to a culture of inclusion
* Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum
* Experience with aircraft, spacecraft, launch vehicles, or automotive in some of the following areas:
* External loads
* Vibro-acoustic analysis
* Thermal Loading
* Analysis using Nastran, Ansys, Abaqus, LS-Dyna, or Opti-struct
* Preferred Qualifications
* COPV Pressure Vessel design and analysis
* Metallic Pressure Vessel design and analysis
* Fluids Lines design and analysis
* Flex Elements design and analysis
* Composite design and analysis skills in any thermoset, thermoplastic, metal matrix and ceramic matrix composites
* Manufacturing methods, material selection, testing, characterization & allowable development
* Experience testing materials, joints, components and vehicles
* Structural optimization using standard industry codes (Optistruct, HyperSizer, Nastran Sol 200, etc)
* Experience with ProEngineer Wildfire 4 / Creo Parametric or greater
* Experience with ProEngineer Wildfire 4 / Creo Parametric or greater piping / routing module
* Experience with Human spaceflight
* Experience with composites
* Experience with AIAA S-080 and S-081
* Experience with EJMA Ninth and Tenth Edition
Your Recruiter
Still have questions? Reach out to
Brian- (phone) (256) 213-1261 (email) [brian.videtic@moseleytechnical.com]{target="_blank" rel="noopener"}
What to Expect
* Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
* Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.
Resources
To apply, send resume to: [resumes@moseleytechnical.com]{target="_blank" rel="noopener"}
For more active job openings: [http://www.moseleytechnical.com](http://www.moseleytechnical.com/){target="_blank" rel="noopener"}
<
Source : Moseley Technical Services, Inc.