Engineer Thin Film Materials - General Atomics and Affiliated Companies
San Diego, CA
About the Job
General Atomics (GA), and its affiliated companies, is one of the world’s leading resources for high-technology systems development ranging from the nuclear fuel cycle to remotely piloted aircraft, airborne sensors, and advanced electric, electronic, wireless and laser technologies.
We currently have an exciting opportunity for a Thin Film Materials Engineer within our Inertial Fusion Technology (IFT) group. This position participates in the development, production, characterization and analysis of novel materials required for laser driven fusion research. The ideal candidate is responsible for determining and developing effective approaches for resolving a wide range of physical vacuum deposition (PVD) coating challenges, to build complex targets with minimum defects. Assignments are normally outlined in terms of overall objectives, customer specifications, and anticipated delivery dates. Deliveries typically involve the physical targets, comprehensive metrology data packages and shipping documents.
DUTIES AND RESPONSIBILITIES:
+ Work with a high degree of independence while incorporating inputs and constraints from others in a team environment.
+ Translate customer specifications into practical fabrication plan with best product quality while minimizing production cost.
+ Perform PVD coatings, including rate check, composition optimization, stress optimization, and contamination control.
+ Work in radiation-controlled areas as part of daily operational tasks.
+ Perform failure analysis, implement and carry out mitigation plan in timely manner.
+ Understand and master characterization techniques over time to support the generation of a comprehensive metrology data package that ships with each project.
+ Open to explore new scientific methods and adapt to the production and characterization of targets.
+ Pursue research projects under the direction of senior staff and management, and work with and provide support to the wider IFT team and national laboratory collaborators in the above topic areas.
+ Perform equipment maintenance, diagnose, repair and upgrade.
+ Maintain safe, clean and organized coating laboratories.
+ Document findings, communicates results to scientific staff and makes technical presentations as required.
+ Publish in recognized scientific journals, present work at conferences.
+ Performs other duties as assigned or required.
We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.
45516
Job Qualifications:
+ Typically requires a Bachelors degree in engineering or related discipline. Equivalent scientific experience may be substituted in lieu of education.
+ A degree in Physical Science is desirable, in areas such as Physics, Material Science, Chemical Engineering, Nano Engineering. Understand and apply general scientific principles. Be willing to learn and explore new scientific approaches.
+ Prior hands-on experience in vacuum coating equipment and PVD/CVD coating processes highly desired. This includes, but is not limited to, sputtering, e-beam, thermal evaporative coatings, etc.
+ Prior experience in cleanroom protocol is highly desired.
+ Software experience can be helpful, such as SolidWorks, AutoCAD, LabVIEW.
+ The ability to learn and perform target characterization using optical and x-ray based metrology tools. This could include Xray absorption spectroscopy, XRF, Radiography, Scanning electron microscopy with EDAX/EDS, various forms of interferometry and confocal microscopy methods, in addition of conventional optical microscopes, Stylus and AFM tools. Prior experience in this area is desirable, but not required.
+ Must demonstrate:
+ Technical expertise and application of scientific principles, concepts, theory, and practice;
+ Ability to organize, plan, schedule, conduct, and coordinate workloads to meet established deadlines or milestones; and
+ Effective in a team environment but have ability to perform with high level of independence.
+ Ability to obtain and maintain a DOE security clearance.
Salary: $56,820 - $96,015 Travel Percentage Required 0 - 25 Relocation Assistance Provided Provided US Citizenship Required? Yes Clearance Required? Desired Clearance Level DOE - Q Workstyle Onsite
General Atomics is committed to hiring and retaining a diverse workforce. We are an Equal Opportunity/Affirmative Action Employer and will consider all qualified applicants for employment without regard to race, color, religion, religious creed, ancestry, gender, pregnancy, sex, sexual orientation, transitioning status, gender identity, gender expression, national origin, age, genetic information, military and veteran status, marital status, medical condition, mental disability, physical disability, or any other basis protected by local, state, or federal law. EEO is the law. We also prohibit compensation discrimination under all applicable laws. To learn more visit https://tbcdn.talentbrew.com/company/499/v2_0/EEO Notices.pdf. U.S. Citizenship is required for certain positions.
We currently have an exciting opportunity for a Thin Film Materials Engineer within our Inertial Fusion Technology (IFT) group. This position participates in the development, production, characterization and analysis of novel materials required for laser driven fusion research. The ideal candidate is responsible for determining and developing effective approaches for resolving a wide range of physical vacuum deposition (PVD) coating challenges, to build complex targets with minimum defects. Assignments are normally outlined in terms of overall objectives, customer specifications, and anticipated delivery dates. Deliveries typically involve the physical targets, comprehensive metrology data packages and shipping documents.
DUTIES AND RESPONSIBILITIES:
+ Work with a high degree of independence while incorporating inputs and constraints from others in a team environment.
+ Translate customer specifications into practical fabrication plan with best product quality while minimizing production cost.
+ Perform PVD coatings, including rate check, composition optimization, stress optimization, and contamination control.
+ Work in radiation-controlled areas as part of daily operational tasks.
+ Perform failure analysis, implement and carry out mitigation plan in timely manner.
+ Understand and master characterization techniques over time to support the generation of a comprehensive metrology data package that ships with each project.
+ Open to explore new scientific methods and adapt to the production and characterization of targets.
+ Pursue research projects under the direction of senior staff and management, and work with and provide support to the wider IFT team and national laboratory collaborators in the above topic areas.
+ Perform equipment maintenance, diagnose, repair and upgrade.
+ Maintain safe, clean and organized coating laboratories.
+ Document findings, communicates results to scientific staff and makes technical presentations as required.
+ Publish in recognized scientific journals, present work at conferences.
+ Performs other duties as assigned or required.
We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.
45516
Job Qualifications:
+ Typically requires a Bachelors degree in engineering or related discipline. Equivalent scientific experience may be substituted in lieu of education.
+ A degree in Physical Science is desirable, in areas such as Physics, Material Science, Chemical Engineering, Nano Engineering. Understand and apply general scientific principles. Be willing to learn and explore new scientific approaches.
+ Prior hands-on experience in vacuum coating equipment and PVD/CVD coating processes highly desired. This includes, but is not limited to, sputtering, e-beam, thermal evaporative coatings, etc.
+ Prior experience in cleanroom protocol is highly desired.
+ Software experience can be helpful, such as SolidWorks, AutoCAD, LabVIEW.
+ The ability to learn and perform target characterization using optical and x-ray based metrology tools. This could include Xray absorption spectroscopy, XRF, Radiography, Scanning electron microscopy with EDAX/EDS, various forms of interferometry and confocal microscopy methods, in addition of conventional optical microscopes, Stylus and AFM tools. Prior experience in this area is desirable, but not required.
+ Must demonstrate:
+ Technical expertise and application of scientific principles, concepts, theory, and practice;
+ Ability to organize, plan, schedule, conduct, and coordinate workloads to meet established deadlines or milestones; and
+ Effective in a team environment but have ability to perform with high level of independence.
+ Ability to obtain and maintain a DOE security clearance.
Salary: $56,820 - $96,015 Travel Percentage Required 0 - 25 Relocation Assistance Provided Provided US Citizenship Required? Yes Clearance Required? Desired Clearance Level DOE - Q Workstyle Onsite
General Atomics is committed to hiring and retaining a diverse workforce. We are an Equal Opportunity/Affirmative Action Employer and will consider all qualified applicants for employment without regard to race, color, religion, religious creed, ancestry, gender, pregnancy, sex, sexual orientation, transitioning status, gender identity, gender expression, national origin, age, genetic information, military and veteran status, marital status, medical condition, mental disability, physical disability, or any other basis protected by local, state, or federal law. EEO is the law. We also prohibit compensation discrimination under all applicable laws. To learn more visit https://tbcdn.talentbrew.com/company/499/v2_0/EEO Notices.pdf. U.S. Citizenship is required for certain positions.
Source : General Atomics and Affiliated Companies