Equipment Maintenance Technician - Sysco
Kissimmee, FL
About the Job
JOB SUMMARY:
The Production Technician II role is essential for supporting the operations team and is responsible for troubleshooting equipment issues and performing preventive maintenance on production equipment throughout the facility with limited supervision
Participate in 5S and Lean manufacturing activities including material handling improvements, production line configuration, and safety procedures.
This role must learn industry leading maintenance practices and methodologies to increase equipment safety, uptime, and performance.
DUTIES AND RESPONSIBILITIES:
Supports company and industry standard safety policies and procedures - OSHA, NEC, NFPA, USDA, FDA, etc.
Perform inspections and complete preventive/predictive maintenance tasks on production and process utility equipment to increase quality, safety, and overall equipment reliability.
Diagnose and repair production and process utility equipment deficiencies and failures; to include, but not limited to mechanical, electrical, pneumatic, and hydraulic equipment
May include facility repairs as needed.
Learn and use continuous improvements tools and methods to improve equipment reliability, may include root cause analysis (RCA), failure mode analysis (FMA) and make recommendations to prevent recurrence.
Work and train with OEM technicians during production equipment rebuilds, line moves, installations, setups, calibrations, and emergency repairs
Read and interpret equipment manuals and work orders to perform required maintenance and service.
Responsible for effectively managing assigned planned work, unplanned failures, and work orders in a high-paced, fluid work environment.
Responsible for accurately and concisely logging work orders in computerized maintenance management system (CMMS) to properly track maintenance and equipment performance metrics; to include labor, equipment uptime, preventive maintenance compliance, MTTR, MTBF, part usage, etc.
QUALIFICATIONS:
Experience
Required
Three (3) plus years of maintenance experience in a manufacturing setting.
Experience troubleshooting mechanical systems, electrical components, hydraulics, pneumatics, pumps, material handling equipment, etc.
Preferred
Experience using lockout tagout, job hazard analysis, hot work permits, confined space, etc
1-3 years of food processing maintenance experience is a preferred.
Experience working in a food processing environment and familiar with USDA, FDA, and SQF policies and procedures.
Education
High School Diploma or GED
Certificates, Licenses, and Registrations:
Required - Must provide own tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics.
Preferred - Formal training in equipment maintenance repair, installation, and troubleshooting of electrical equipment is highly desired.
Skills
Moderate knowledge of OSHA safety regulations.
Moderate knowledge of environmental regulations
Basic computer skills and knowledge
Moderate knowledge and skill in Preventive Maintenance Inspections and repair
Moderate knowledge and skill in diagnosis and repair of mechanical, electrical, pneumatic and hydraulic systems
Moderate knowledge and skill with a multi-meter and infrared thermometer.
Ability to operate a forklift and scissor lift
Ability to read and interpret maintenance manuals
Ability to read, analyze and interpret technical procedures, and processes
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals
Ability to work both alone and in a team environment
Ability to manage and prioritize multiple work orders in a fluid and dynamic environment
Ability concisely report and escalate equipment repair statuses and timeframes
Basic knowledge in PLC, VFD/VSD, and relay logic is preferred.
Moderate knowledge and skill in welding and cutting (gas, electric, MIG, TIG) is preferred.
Physical Demands:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions
The employee is occasionally required to sit and must frequently lift heavy items.
The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools and other shop equipment
Ability to operate various pieces of equipment
Ability to stand, sit, walk, bend, reach
Ability to push/pull
Ability to lift /carry
Ability to grasp tools
Ability to perform Repetitive motion: wrenches and hand tools
Working Conditions:
The work environment characteristics described here are representative of those an associate may encounter while performing the essential functions of the job
Food processing temperatures of <=38 degrees F.
While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call
The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e
training, business continuation, etc.)
The associate is occasionally exposed to high, precarious places and confined spaces
The associate is occasionally exposed to fumes or airborne particles
The noise level in the work environment is usually moderate.
The Production Technician II role is essential for supporting the operations team and is responsible for troubleshooting equipment issues and performing preventive maintenance on production equipment throughout the facility with limited supervision
Participate in 5S and Lean manufacturing activities including material handling improvements, production line configuration, and safety procedures.
This role must learn industry leading maintenance practices and methodologies to increase equipment safety, uptime, and performance.
DUTIES AND RESPONSIBILITIES:
Supports company and industry standard safety policies and procedures - OSHA, NEC, NFPA, USDA, FDA, etc.
Perform inspections and complete preventive/predictive maintenance tasks on production and process utility equipment to increase quality, safety, and overall equipment reliability.
Diagnose and repair production and process utility equipment deficiencies and failures; to include, but not limited to mechanical, electrical, pneumatic, and hydraulic equipment
May include facility repairs as needed.
Learn and use continuous improvements tools and methods to improve equipment reliability, may include root cause analysis (RCA), failure mode analysis (FMA) and make recommendations to prevent recurrence.
Work and train with OEM technicians during production equipment rebuilds, line moves, installations, setups, calibrations, and emergency repairs
Read and interpret equipment manuals and work orders to perform required maintenance and service.
Responsible for effectively managing assigned planned work, unplanned failures, and work orders in a high-paced, fluid work environment.
Responsible for accurately and concisely logging work orders in computerized maintenance management system (CMMS) to properly track maintenance and equipment performance metrics; to include labor, equipment uptime, preventive maintenance compliance, MTTR, MTBF, part usage, etc.
QUALIFICATIONS:
Experience
Required
Three (3) plus years of maintenance experience in a manufacturing setting.
Experience troubleshooting mechanical systems, electrical components, hydraulics, pneumatics, pumps, material handling equipment, etc.
Preferred
Experience using lockout tagout, job hazard analysis, hot work permits, confined space, etc
1-3 years of food processing maintenance experience is a preferred.
Experience working in a food processing environment and familiar with USDA, FDA, and SQF policies and procedures.
Education
High School Diploma or GED
Certificates, Licenses, and Registrations:
Required - Must provide own tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics.
Preferred - Formal training in equipment maintenance repair, installation, and troubleshooting of electrical equipment is highly desired.
Skills
Moderate knowledge of OSHA safety regulations.
Moderate knowledge of environmental regulations
Basic computer skills and knowledge
Moderate knowledge and skill in Preventive Maintenance Inspections and repair
Moderate knowledge and skill in diagnosis and repair of mechanical, electrical, pneumatic and hydraulic systems
Moderate knowledge and skill with a multi-meter and infrared thermometer.
Ability to operate a forklift and scissor lift
Ability to read and interpret maintenance manuals
Ability to read, analyze and interpret technical procedures, and processes
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals
Ability to work both alone and in a team environment
Ability to manage and prioritize multiple work orders in a fluid and dynamic environment
Ability concisely report and escalate equipment repair statuses and timeframes
Basic knowledge in PLC, VFD/VSD, and relay logic is preferred.
Moderate knowledge and skill in welding and cutting (gas, electric, MIG, TIG) is preferred.
Physical Demands:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions
The employee is occasionally required to sit and must frequently lift heavy items.
The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools and other shop equipment
Ability to operate various pieces of equipment
Ability to stand, sit, walk, bend, reach
Ability to push/pull
Ability to lift /carry
Ability to grasp tools
Ability to perform Repetitive motion: wrenches and hand tools
Working Conditions:
The work environment characteristics described here are representative of those an associate may encounter while performing the essential functions of the job
Food processing temperatures of <=38 degrees F.
While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call
The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e
training, business continuation, etc.)
The associate is occasionally exposed to high, precarious places and confined spaces
The associate is occasionally exposed to fumes or airborne particles
The noise level in the work environment is usually moderate.
Source : Sysco