Freeport LNG - Process Control Engineer - First Tek, Inc.
Quintana, TX 77541
About the Job
Roles and Responsibilities:
Location/Travel Information
This position is based at the Client Facility, however, some travel to local off-site locations as required. This position requires the incumbent to hold a valid, unexpired driver license at all times in order to perform the essential functions of the job.
Primary Duties and Responsibilities/Essential Functions
- Supports Honey Experion and PLC engineering.
- Supports in the Management of Change process to ensure that risks from Process Control changes are properly identified and managed.
- Provide engineering and technical input during the development and/or revision of Process Control related standards, procedures, guidelines and plans as required to meet industry standards or regulatory requirements.
- Exposure to DCS regulatory control, loop tuning and basic compressor controls hardware and software such as Client Experion, CCC, Client Mark VIe.
- Responsible for conducting RCFA on Process Control equipment failures to eliminate or mitigate consequences.
- Responsible for conducting RCFA on equipment or programming failures to eliminate or mitigate consequences.
- Support Alarm Management program execution
- Develop as a subject matter expert on Process Control Systems engineering and SIS.
- Working knowledge of Engineering Codes and Standards related to Instrumentation engineering, NFPA, ISA, IEC and others by participating in engineering standards committees.
- Knowledge of Engineering systems, calculations, applications and operations methods and materials, and engineering application of computers.
- Ability to communicate clearly in verbal and written form.
- Ability to conduct efficient meetings.
- Ability to develop comprehensive scopes of work.
Other Duties
Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.
Qualifications and Education Requirements:
****Transportation Worker Identification Card (TWIC) Required****
5+ Years of Process Control Engineering Experience
1+ years of experience in an operating industrial facility
Bachelor's degree in engineering
The company is seeking a Process Control Engineer that will be responsible for the design, development, implementation, operation, monitoring and maintenance of industrial control systems (ICS) in an Client facility, with supervision.
Competencies
- Experience with Client Experion, Safety Manager and PLCs
- Safety Instrumented Systems certifications or course work
- Detail oriented, professional, and reliable
- Outstanding written and verbal communication skills
- Proficiency in the use of word processing, spreadsheet, database and presentation software.
- Possess strong organizational and time management skills
- Ability to prioritize in order to meet deadlines
- Basic project management and supervision skills.
- Possesses knowledge of engineering fundamentals in more than one discipline.
- Possesses basic knowledge of cross-functional project execution.
Work Environment
- Must be able to wear all necessary PPE equipment to perform job functions.
- Operates in a professional office environment within or outside of an industrial plant environment.
- Possible exposure to indoor and outdoor weather conditions.
- Possible exposure to hot, cold, wet, humid or windy weather conditions.
- Possible exposure to moving mechanical parts and electrical circuits.
- Possible exposure to constant, or intermittent sounds of a pitch level sufficient to cause marked distraction.
- Routinely uses standard office and field communications equipment such as computers, phones, photocopiers w/scanner and fax, and radios.
For more information, please email us at recruiters@cenergyintl.com
Pay Range:
The pay range for this position is $60.00-70.00 per hour; however, the pay offered may vary depending on job-related knowledge, skills, and experience. This pay information is being provided pursuant to applicable law and is based in part on market location.
Please Note:
Must have a valid driver's license and current state required minimum vehicle insurance coverage to drive onto Client and Company property.
Benefits:
The benefits available with this position include:
Cenergy is a dynamic, diverse, woman-owned company that has provided stellar support to our clients globally for over 25 years! We hire extraordinary people, and each of our team members are encouraged to embody our core values to drive innovation and own it with integrity and trust while adding to our positive and forward-thinking atmosphere.
Location/Travel Information
This position is based at the Client Facility, however, some travel to local off-site locations as required. This position requires the incumbent to hold a valid, unexpired driver license at all times in order to perform the essential functions of the job.
Primary Duties and Responsibilities/Essential Functions
- Supports Honey Experion and PLC engineering.
- Supports in the Management of Change process to ensure that risks from Process Control changes are properly identified and managed.
- Provide engineering and technical input during the development and/or revision of Process Control related standards, procedures, guidelines and plans as required to meet industry standards or regulatory requirements.
- Exposure to DCS regulatory control, loop tuning and basic compressor controls hardware and software such as Client Experion, CCC, Client Mark VIe.
- Responsible for conducting RCFA on Process Control equipment failures to eliminate or mitigate consequences.
- Responsible for conducting RCFA on equipment or programming failures to eliminate or mitigate consequences.
- Support Alarm Management program execution
- Develop as a subject matter expert on Process Control Systems engineering and SIS.
- Working knowledge of Engineering Codes and Standards related to Instrumentation engineering, NFPA, ISA, IEC and others by participating in engineering standards committees.
- Knowledge of Engineering systems, calculations, applications and operations methods and materials, and engineering application of computers.
- Ability to communicate clearly in verbal and written form.
- Ability to conduct efficient meetings.
- Ability to develop comprehensive scopes of work.
Other Duties
Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.
Qualifications and Education Requirements:
****Transportation Worker Identification Card (TWIC) Required****
5+ Years of Process Control Engineering Experience
1+ years of experience in an operating industrial facility
Bachelor's degree in engineering
The company is seeking a Process Control Engineer that will be responsible for the design, development, implementation, operation, monitoring and maintenance of industrial control systems (ICS) in an Client facility, with supervision.
Competencies
- Experience with Client Experion, Safety Manager and PLCs
- Safety Instrumented Systems certifications or course work
- Detail oriented, professional, and reliable
- Outstanding written and verbal communication skills
- Proficiency in the use of word processing, spreadsheet, database and presentation software.
- Possess strong organizational and time management skills
- Ability to prioritize in order to meet deadlines
- Basic project management and supervision skills.
- Possesses knowledge of engineering fundamentals in more than one discipline.
- Possesses basic knowledge of cross-functional project execution.
Work Environment
- Must be able to wear all necessary PPE equipment to perform job functions.
- Operates in a professional office environment within or outside of an industrial plant environment.
- Possible exposure to indoor and outdoor weather conditions.
- Possible exposure to hot, cold, wet, humid or windy weather conditions.
- Possible exposure to moving mechanical parts and electrical circuits.
- Possible exposure to constant, or intermittent sounds of a pitch level sufficient to cause marked distraction.
- Routinely uses standard office and field communications equipment such as computers, phones, photocopiers w/scanner and fax, and radios.
For more information, please email us at recruiters@cenergyintl.com
Pay Range:
The pay range for this position is $60.00-70.00 per hour; however, the pay offered may vary depending on job-related knowledge, skills, and experience. This pay information is being provided pursuant to applicable law and is based in part on market location.
Please Note:
Must have a valid driver's license and current state required minimum vehicle insurance coverage to drive onto Client and Company property.
Benefits:
The benefits available with this position include:
- Ongoing Training (RSO, Systems, Software Programs, OSHA Safety, JJ Keller, etc.)
- Continuous Employment Development and Learning
- Ongoing Advocacy, internal assets with HSE, Legal and HR teams and experts to aid in Employee Career Path and Advancement
- 401K
- Healthcare Group Medical Coverage & Healthcare for California only
- Dental Insurance Coverage
- Vision Insurance Coverage
- Basic Life Insurance & AD&D
- Long Term Disability
- Voluntary Short-Term Disability
- Direct Deposit
- Health Savings and Flexible Spending Accounts
Cenergy is a dynamic, diverse, woman-owned company that has provided stellar support to our clients globally for over 25 years! We hire extraordinary people, and each of our team members are encouraged to embody our core values to drive innovation and own it with integrity and trust while adding to our positive and forward-thinking atmosphere.
Source : First Tek, Inc.