Maintenance Tech - Level C at The Planet Group
Grand Prairie, TX
About the Job
Job Description
The Maintenance Tech is responsible for but not limited to the following areas of working on and maintaining horizontal form fill and seal equipment, shrink wrap tunnels, forklift minor repairs, stretch wrapper, print registered bundle wrappers and heavy electrical work in the warehouse along with building maintenance
He/she must have great communication skills through phone, email and personal contact.
Responsibilities and Essential Duties
Perform routine preventative maintenance on mechanical handling equipment (forklifts, pallet jacks, sweepers, etc.)
Document records of maintenance, inspections, and repairs.
Select repair parts and update parts records.
Repair mechanical damage and replace defective parts, which may include welding, brazing, and soldering
Repairs are made to mechanical handling equipment, racking, floors, plumbing, piping, and other warehouse structural components.
Maintenance and repair of batteries and chargers.
Applies mechanical skills and knowledge to troubleshooting and repair of electrical, plumbing, pipe fitting, fabrication, building construction, and other warehouse maintenance/repair situations.
Reads and interprets schematics, drawings, and other diagnostic aids in the scope of troubleshooting, repair, and fabrication work.
Reads and interprets equipment manuals and work orders to perform required maintenance and service.
Familiar with mechanical hand tools, and with measuring (tape measures, micrometers, drill gauges, etc.)
Perform mechanic skills including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting and repair of production machines.
Comply with OSHA Safety and Health regulations and maintain a clean and orderly work area
Job Contacts (main interfaces inside and outside the company)Facility Managers, Operation Managers, Outside Contractors, Warehouse Personnel & Office Personnel
*Knowledge, skills and experience- *required
Candidate Requirements- TangiblesStrong electrical troubleshooting skills
Strong mechanical aptitude
Understanding of high-voltage wiring (480V 3-phase motors)
Multi-craft maintenance and repair (e.g., performing interrelated repairs on electrical systems and mechanical systems
Willingness to work under pressure to fix equipment
Work urgently to get the equipment back up and running
Troubleshooting issues on a wide variety of equipment
Will conduct repair failures of production and facilities equipment
Ensure maximum equipment efficiency, effectiveness, and reliability
Responding to maintenance calls is part of your job, and this can sometimes mean helping complete a repair that has already been started
You will inspect machines, develop repair lists, and identify short-term and long-term repairs so that machines run correctly
Candidate Requirements- IntangiblesCustomer Service: given our emphasis on mechanical aptitude, you might be surprised to see customer service listed here, but remember we interact with all levels of team members on the floor
It is important that you, and we as a team, treat all team members with the same level of service as we would our consumers.
Flexibility: you'll be switching gears, shifting priorities, and balancing task lists with calls for maintenance repairs
Flexibility - and keeping your cool - will allow you to both focus and prioritize your work.
Self-Starter: you will often find yourself working unsupervised, so taking ownership of your quality and speed of work is essential when conducting preventative maintenance or addressing equipment failure.
Safety Focused: your attention to company policies and procedures regarding safety will minimize risks to yourself, your team, and the quality of our products
Safety is everyone's job
Educational Background:Minimum of a High School Diploma, 5 years equivalent experience.
Knowledge/Skills Required:Basic computer skills including use of Microsoft Office.
Experience with C.M.M.S
software (Preventive Maintenance/Work Order distribution systems).
Understanding encoders and equipment timing.
Knowledge of Servo drives and motors.
Variable Frequency drive operation and configuration.
Basic knowledge of logic software.
Preferred Knowledge/Skills:Some college is desirable
Fluent in Spanish, both written and verbal, is considered an asset
The Maintenance Tech is responsible for but not limited to the following areas of working on and maintaining horizontal form fill and seal equipment, shrink wrap tunnels, forklift minor repairs, stretch wrapper, print registered bundle wrappers and heavy electrical work in the warehouse along with building maintenance
He/she must have great communication skills through phone, email and personal contact.
Responsibilities and Essential Duties
Perform routine preventative maintenance on mechanical handling equipment (forklifts, pallet jacks, sweepers, etc.)
Document records of maintenance, inspections, and repairs.
Select repair parts and update parts records.
Repair mechanical damage and replace defective parts, which may include welding, brazing, and soldering
Repairs are made to mechanical handling equipment, racking, floors, plumbing, piping, and other warehouse structural components.
Maintenance and repair of batteries and chargers.
Applies mechanical skills and knowledge to troubleshooting and repair of electrical, plumbing, pipe fitting, fabrication, building construction, and other warehouse maintenance/repair situations.
Reads and interprets schematics, drawings, and other diagnostic aids in the scope of troubleshooting, repair, and fabrication work.
Reads and interprets equipment manuals and work orders to perform required maintenance and service.
Familiar with mechanical hand tools, and with measuring (tape measures, micrometers, drill gauges, etc.)
Perform mechanic skills including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting and repair of production machines.
Comply with OSHA Safety and Health regulations and maintain a clean and orderly work area
Job Contacts (main interfaces inside and outside the company)Facility Managers, Operation Managers, Outside Contractors, Warehouse Personnel & Office Personnel
*Knowledge, skills and experience- *required
Candidate Requirements- TangiblesStrong electrical troubleshooting skills
Strong mechanical aptitude
Understanding of high-voltage wiring (480V 3-phase motors)
Multi-craft maintenance and repair (e.g., performing interrelated repairs on electrical systems and mechanical systems
Willingness to work under pressure to fix equipment
Work urgently to get the equipment back up and running
Troubleshooting issues on a wide variety of equipment
Will conduct repair failures of production and facilities equipment
Ensure maximum equipment efficiency, effectiveness, and reliability
Responding to maintenance calls is part of your job, and this can sometimes mean helping complete a repair that has already been started
You will inspect machines, develop repair lists, and identify short-term and long-term repairs so that machines run correctly
Candidate Requirements- IntangiblesCustomer Service: given our emphasis on mechanical aptitude, you might be surprised to see customer service listed here, but remember we interact with all levels of team members on the floor
It is important that you, and we as a team, treat all team members with the same level of service as we would our consumers.
Flexibility: you'll be switching gears, shifting priorities, and balancing task lists with calls for maintenance repairs
Flexibility - and keeping your cool - will allow you to both focus and prioritize your work.
Self-Starter: you will often find yourself working unsupervised, so taking ownership of your quality and speed of work is essential when conducting preventative maintenance or addressing equipment failure.
Safety Focused: your attention to company policies and procedures regarding safety will minimize risks to yourself, your team, and the quality of our products
Safety is everyone's job
Educational Background:Minimum of a High School Diploma, 5 years equivalent experience.
Knowledge/Skills Required:Basic computer skills including use of Microsoft Office.
Experience with C.M.M.S
software (Preventive Maintenance/Work Order distribution systems).
Understanding encoders and equipment timing.
Knowledge of Servo drives and motors.
Variable Frequency drive operation and configuration.
Basic knowledge of logic software.
Preferred Knowledge/Skills:Some college is desirable
Fluent in Spanish, both written and verbal, is considered an asset