Operator Repairperson - Carolinas Staffing Solutions
Conway, SC
About the Job
Operator Repairperson
Apply Here: https://jobapply.page.link/H77T9
Apply Here: https://jobapply.page.link/H77T9
Job Summary:
To contribute to our goal of exceeding customers’ expectations by delivering competitive, quality amorphous metal products and services on time, every time. The Operator-Repairperson – Bldg 90 position is responsible for DT Core, slitting, winding, annealing (heat-treating), and testing amorphous metal ribbon products (e.g. braze products, pulse cores) to ensure they conform to customer requirements.
Essential Job Functions:
- Cut and or assemble DT cores
- Use forklift, crane, electric lift, and/or up-ender to position amorphous metal spools on slitter or winder
- Set up slitter, take-up spools, and winder (i.e. thread up); slit and/or wind materials onto take-up spools
- Visually inspect wound materials and measure using hand tools, including micrometers, eye loops, and calipers
- Visually inspect, flow test, measure with a micrometer, and conduct magnetic testing for brazing products and pulse cores, which must also be wound with a layer of insulating Mylar
- Lift wound spools (maximum weight of 25kg or 55lbs) on and off-scale and record data in the computer system
- Wrap wire sets around ribbon spools and measure conductivity & magnetic properties using testing machinery
- Manually load amorphous spools of metal ribbon into an annealing oven, allow the oven to cycle, and allow materials to cool before unloading
- Send samples to the quality assurance (QA) department, as required
- Generate product labels and enter tracking information into the computer system
- Manually move wound product spools to pallet, box, or wooden crate, and use a forklift to transport pallet or crate to inventory or to the warehouse for shipping
- Push scrap hopper to baler, load, and initiate baling; manually move compacted bales into holding bin
Note: This position can rotate between the slitting & winding, braze, pulse cores, annealing, and testing functions, as skills permit
Knowledge, Skills, & Abilities (KSAs):
Ability to read and understand measurements and directions
Demonstrated mechanical aptitude
Basic computer skills: ability to enter, retrieve, and evaluate data
Education, Training, & Experience:
High school graduate or equivalent (required)
Prior industrial/mechanical experience (preferred)
Application Process: Interested candidates can register for this position by visiting any of the three Carolinas Staffing Solutions office locations listed below. You may also contact the respective offices for further information regarding this or any other employment opportunities.
Office Locations:
Office Locations:
Myrtle Beach Office:
Walk-ins: Monday – Friday, 9:00 a.m. to 11:00 a.m. or 1:00 p.m. to 3:00 p.m.
Address: 3691 Palmetto Point Blvd, Myrtle Beach, SC 29588
Phone: 843-293-5400
Whiteville Office:
Walk-ins: Monday – Friday, 8:00 a.m. to 11:00 a.m. or 1:00 p.m. to 4:00 p.m.
Address: 1727 S. Madison Street, Whiteville, NC 28472
Phone: 910-641-0031
Walk-ins: Monday – Friday, 8:00 a.m. to 11:00 a.m. or 1:00 p.m. to 4:00 p.m.
Address: 1727 S. Madison Street, Whiteville, NC 28472
Phone: 910-641-0031
Shallotte Office:
Walk-ins: Monday – Friday, 8:00 a.m. to 11:00 a.m. or 1:00 p.m. to 4:00 p.m.
Address: 4480 Main St, Shallotte, NC 28470
Phone: 910-754-5393
Walk-ins: Monday – Friday, 8:00 a.m. to 11:00 a.m. or 1:00 p.m. to 4:00 p.m.
Address: 4480 Main St, Shallotte, NC 28470
Phone: 910-754-5393
#CSSIJOBS
Source : Carolinas Staffing Solutions