Press Operator - We Hire People

Integrated Talent Strategies (ITS) is working with a manufacturing leader to find a Press Operator.

1. Prepare Press

• Unbolt/ unclamp die
• Remove scrap and lubricant from the press
• Empty and clean buckets and barrels
• Clean bolster
• Repeat with each run
• Adjust arm jerkers

1. Set Die in Press

• Push the die onto the bolster
• Adjust the die to the center
• Push the button to position the ram
• Bolt/ clamp upper half of die to ram (use socket wrench)
• Check die alignment
• Bolt/ clamp the lower half of the die to the bolster

1. Set Coil and Feed Length

• Load coil (hoist or chain fall) onto reel or in the cradle
• Remove the banding on the coil by cutting with metal cutters
• Feed strip into the press feed
• Activate the switch, advance the coil through the die
• Install lube line, air blow-offs, and chutes

1. Run Parts of Inspection Approval

• Run press
• Check parts of gauging/ measuring
• Obtain inspection approval

1. Monitor Press

• Check for proper feed
• Lubricate as necessary
• Check chutes, bolts, and parts being blown out

1. Document Statistical Process Control

• Pick up part
• Measure part
• Return part to bin
• Record measurements

About Integrated Talent Strategies (ITS)
ITS is an international recruiting and staffing firm specializing in Engineering, Technical, and Professional positions. Founded in 1984 as a subsidiary of an engineering firm, ITS continues to remain a strategic partner for the job seeker. Our clients include some of the largest and most respected architectural, engineering, and manufacturing companies in business today. Our ability to offer a wide range of services, and the flexibility to adjust to the changing needs of our clients, has allowed us to maintain a solid reputation for several decades.