Quality Engineer - Zobility

Job Description:

• Define containment actions to apply for customer protection (including supplier Issues)
• Do vehicle issue diagnosis and root cause analysis
• Ensure that his team carries out the pre-analysis activities on time
• Do risk assessments and lead corrective action plans
• Guarantee the product process maturity of the components of his perimeter management of serial life (windows change management).
• Propose alternative product solution in case of issues (as shortage) to avoid to stop mass production in the plant
• Participate in Quality ENG tech clubs.
• Implementation of good idea and standards (Read Across)
• Ensure the right application in the plant of the technical requirements and the meta function "me tiers standards of his perimeter
• Ensure that the skills of his team is at the right level
• Ensure the management activities of his team (daily management control meeting)
• Ensure that his team is working in safety
• Lead quality KPI management to achieve quality objectives, driving improvement/corrective actions and escalation
• Resolution of systemic/chronic or major quality issues (Top Warranty, Recalls, ...)
• Technical support Yard Holds / Product Related Issues (PRI's) technical referent inside the PRI.
• Set-up / On-going Controls for Process / product Standards for Vehicle & System Functional Objectives (i.e. ADAS, BSR, FEA)

Responsibilities:

• Advancing Customer Quality
• Animate customer satisfaction/quality through supplier quality animation, Customer Feedback & Networks (Animation processing of Palantir Foundry, Supplier Ticket IT Tool (SQP/NCT/Amadeus) and Customer/Supplier obeyas
• Escalate as needed with Quality Plant ENGineering Manager and/or Manager FQM of his Quality Meta Function
• Ensure Feedback lesson learn to Team Design
• Ensure the management of sensitive processes of his perimeter (noises, geometry, sealing, etc.)
• Ensure the landing of Serial Life Windows & evolutions/events Product including costsavings
• Evaluate & Restore Hand-Over Profession ENG milestone to anticipate drift
• Pilot points of change to implement actions necessary to secure flow
• Participate in PPAP animation and issue a verdict J4 (project/factory transfer) or J5 (serial life)
• Participate if needed in Panorama Evolution Product Process (on Master Chief Engineer request)
• Support the plant in the safety of production on his perimeter
• Assist the team (expertise) as needed on summaries Diamond 1-3 (NC factory) and Diamond 4 (supplier NC)
• Pilot partners/Supplier for roll-back in case of proven NC
• Protect the customer by setting up a containment (Interim Solution) or a control/rework dam
• Formalize Remedies (redesign) Diamond 5-6-7
• Pilot Remedy hand-over to Life-Series Redesign Teams
• Be the guarantor of the robustness of the plant monitoring plan
• Implement and relay the monitoring plan in the plant, which has the power to derogate from it
• Animate the performance of the different control/reworking workstations by identifying the traversal
• Make Layered Process Audit (LPA) on positions identified as sensitive in the flow
• Conducting plant maturity audits, sharing them and tracing reconvergence actions
• Lead his team (attached to the plant) & contribute to the performance
• Build the team's workload plan, guarantee the smoothing of the workload by prioritizing and allocating tasks, manage the subjects escalated
• Ensure the efficiency of the team through structured processing (A3 MRP, 5P, etc.) of problems encountered and risks
• Coordinate & Pilote the convergence of KPi Plant Quality (DVx defect/vehicle, DRR direct run ratio, SCA Stellantis Customer Audit, PPM 3MIS)
• Skills crossmaping of his team

Requirements:

• Minimum of 3-5 years of related experience
• Previous experience in Engineering Department, Vehicle/mechanic Plant or Project team
• Ability to lead an Engineering team to deliver product changes and launches on time
• Experience with Root Cause Analysis (RCA) and corrective actions
• Strong communication skills, both written and verbal from High Level Meetings down to the Shop Floor
• Ability to work off shift hours as necessary
• Self-motivated and directed
• Ability to thrive in a high intensity environment while working on multiple projects
• Rigorous and pragmatic
• Languages: plant language & English
• Preferred Requirements
• Masters Degree
• Green belt
• World Class Manufacturing Experience

• Key Performance Indicators
• Quantitative KPIs including but not limited to:
• Problem Resolution - Time to fix, Time to close QAN/QIF delay
• Pre-analysis handling time (parts analysis back from the field) Palantir-Foundry
• Deviations to handle
• Internal Plant Indicators (DRR, DVx, SCA, status/Repair vehicles, roll bench, wheel alignment, ADAS, ...)
• Issues without containment action
• Issues to escalate
• Safety issues handling time
• PPAP KPI (assembling test). Initial Samples verdict delay
• New issues detected by audit
• 3MIS Warranty (PPM)
• Safety KPI "STOP
• 5S

• Bachelor's degree (BAC+3) or higher in the fields of Mechanical Engineering, Electrical Engineering or Mechanical Engineering Technology from an accredited university (other Engineering degrees, in combination with relevant experience may be considered).

We offer attractive, competitive compensation and benefits including, medical, dental, 401k, short-term disability, AD&D, tuition reimbursement, and more. If you take pride in your work and are committed to personal and professional success, let's talk. Please visit www.zobility.com to learn more.

Zobility is RGBSI's workforce management and staffing division. RGBSI is a multi-national corporation headquartered in Troy, MI with branches throughout the USA, Canada, Germany, and India.