Quality Technician - 2nd Shift - Grenada - Techtronic Industries North America, Inc.
Grenada, MS
About the Job
Job Description:
The Quality Technician 1 is responsible for following procedures to ensure part and material conformance per specifications utilizing safety standards as required. Quality Technician 1 will demonstrate the ability to work with minimal supervision in multiple disciplines listed below in this description.
Duties and Responsibilities:
Metrology
· Use lab equipment for gage calibration and auditing parts.
· Conduct heat treat testing per specification.
· Manage calibration recordkeeping and update records on system.
· Setup and operate Vision system to measure angles, lengths, radii, and center distances.
· Take appropriate corrective action for continuous quality improvement and customer satisfaction.
· Know and practice the 5 S’s for industrial housekeeping.
· Operate lab equipment and gages properly and adhere to all safety requirements in the work area.
· Able to react to change effectively and handle other tasks as assigned.
Receiving Inspection
· Inspect all incoming material and parts per quality specification after being received in cell.
· Maintain receiving files and records per requirements.
· Place kanban cards on inspected material.
· Create and complete NCR’s, SCAR’s, and CAR’s and enter information into computer.
· Perform workplace audits with documented results.
· Set up and operate gages to accurately inspect material and parts.
· Control scrapped or rejected parts until disposition is determined.
· Perform preventative maintenance as required.
· Take appropriate corrective action for continuous quality improvement and customer satisfaction.
· Know and practice the 5S’s for industrial housekeeping.
· Operate tools, and equipment properly and adhere to all safety requirements in the work area.
· Able to react to change effectively and handle other tasks as assigned.
Heat Treat
· Preparation of test samples through a process of polishing and chemical activation of sample surface.
· Set up and operation of gages to accurately inspect material hardness and micro-hardness.
· Creation of test samples through the use of specialized cutting equipment.
· Maintain files and records per requirements.
· Take appropriate corrective action for continuous quality improvement and customer satisfaction.
· Know and practice the 5S’s for industrial housekeeping.
· Operate tools, presses and equipment properly and adhere to all safety requirements in the work area.
· Able to react to change effectively and handle other tasks as assigned.
Auditing
· Conduct recon tools, accessories packaging, and accessories manufacturing audits daily utilizing print and process control plan specifications.
· Disassemble and analyze product during the performance of a teardown audit.
· Perform Process Control Plan audits when required.
· Investigate and use SPC tools for problem solving failures and rejects.
· Maintain and complete proper records and documentation.
· Take appropriate corrective action for continuous quality improvement and customer satisfaction including NCR, SCAR, and CAR databases for non-conforming product.
· Use gauges and other equipment to measure tolerances and dimensions of parts per specifications.
· Know and practice the 5S’s for industrial housekeeping.
· Operate tools, and equipment properly and adhere to all safety requirements in the work area.
· Able to react to change effectively and handle other tasks as assigned.
Battery Warranty Analysis
· Conduct warranty analysis on batteries returned from Authorized Service Centers and Authorized Distributors per the Battery Return Policies currently in place.
· Maintain and complete proper records and documentation.
· Prepare batteries for recycling once they have been evaluated.
· Know and practice the 5S’s for industrial housekeeping.
· Able to react to change effectively and handle other tasks as assigned.
Education
· Requires an education equivalent to high school diploma or GED.
· Technical certification is preferred
Experience
· Quality assurance or quality control experience preferred.
· Experience reading prints and using gages required.
· Vendor/supplier relations experience helpful.
Knowledge Required
· Computer experience and experience using SPC techniques helpful.
· Excellent organizational skills required.
· Ability to perform work per instructions with minimal supervision, and within reasonable time.
Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled
We endeavor to make this site accessible to any and all users. If you need to contact us regarding technical accessibility of our website call 443-391-1542. This number is only for technical accessibility issues, not general employment or job posting inquiries.
The Quality Technician 1 is responsible for following procedures to ensure part and material conformance per specifications utilizing safety standards as required. Quality Technician 1 will demonstrate the ability to work with minimal supervision in multiple disciplines listed below in this description.
Duties and Responsibilities:
Metrology
· Use lab equipment for gage calibration and auditing parts.
· Conduct heat treat testing per specification.
· Manage calibration recordkeeping and update records on system.
· Setup and operate Vision system to measure angles, lengths, radii, and center distances.
· Take appropriate corrective action for continuous quality improvement and customer satisfaction.
· Know and practice the 5 S’s for industrial housekeeping.
· Operate lab equipment and gages properly and adhere to all safety requirements in the work area.
· Able to react to change effectively and handle other tasks as assigned.
Receiving Inspection
· Inspect all incoming material and parts per quality specification after being received in cell.
· Maintain receiving files and records per requirements.
· Place kanban cards on inspected material.
· Create and complete NCR’s, SCAR’s, and CAR’s and enter information into computer.
· Perform workplace audits with documented results.
· Set up and operate gages to accurately inspect material and parts.
· Control scrapped or rejected parts until disposition is determined.
· Perform preventative maintenance as required.
· Take appropriate corrective action for continuous quality improvement and customer satisfaction.
· Know and practice the 5S’s for industrial housekeeping.
· Operate tools, and equipment properly and adhere to all safety requirements in the work area.
· Able to react to change effectively and handle other tasks as assigned.
Heat Treat
· Preparation of test samples through a process of polishing and chemical activation of sample surface.
· Set up and operation of gages to accurately inspect material hardness and micro-hardness.
· Creation of test samples through the use of specialized cutting equipment.
· Maintain files and records per requirements.
· Take appropriate corrective action for continuous quality improvement and customer satisfaction.
· Know and practice the 5S’s for industrial housekeeping.
· Operate tools, presses and equipment properly and adhere to all safety requirements in the work area.
· Able to react to change effectively and handle other tasks as assigned.
Auditing
· Conduct recon tools, accessories packaging, and accessories manufacturing audits daily utilizing print and process control plan specifications.
· Disassemble and analyze product during the performance of a teardown audit.
· Perform Process Control Plan audits when required.
· Investigate and use SPC tools for problem solving failures and rejects.
· Maintain and complete proper records and documentation.
· Take appropriate corrective action for continuous quality improvement and customer satisfaction including NCR, SCAR, and CAR databases for non-conforming product.
· Use gauges and other equipment to measure tolerances and dimensions of parts per specifications.
· Know and practice the 5S’s for industrial housekeeping.
· Operate tools, and equipment properly and adhere to all safety requirements in the work area.
· Able to react to change effectively and handle other tasks as assigned.
Battery Warranty Analysis
· Conduct warranty analysis on batteries returned from Authorized Service Centers and Authorized Distributors per the Battery Return Policies currently in place.
· Maintain and complete proper records and documentation.
· Prepare batteries for recycling once they have been evaluated.
· Know and practice the 5S’s for industrial housekeeping.
· Able to react to change effectively and handle other tasks as assigned.
Education
· Requires an education equivalent to high school diploma or GED.
· Technical certification is preferred
Experience
· Quality assurance or quality control experience preferred.
· Experience reading prints and using gages required.
· Vendor/supplier relations experience helpful.
Knowledge Required
· Computer experience and experience using SPC techniques helpful.
· Excellent organizational skills required.
· Ability to perform work per instructions with minimal supervision, and within reasonable time.
Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled
We endeavor to make this site accessible to any and all users. If you need to contact us regarding technical accessibility of our website call 443-391-1542. This number is only for technical accessibility issues, not general employment or job posting inquiries.
Source : Techtronic Industries North America, Inc.