R&D Design and Fabrication Technician (Research Tec 4/5) - Los Alamos National Laboratory
Los Alamos, NM
About the Job
What You Will Do
This position will be filled at either the Research Tec 4/Research Tec 5 level, depending on the skills of the selected candidate. Additional job responsibilities (outlined below) will be assigned if the candidate is hired at the higher level.
Research Tec 4 $69,500 - $110,300
Join our Team! The High Explosives Science and Technology (Q-5) group is seeking an individual to provide technical support specifically in the area of design, fabrication, and assembly of components used in research and development experiments. You must provide an agile response to group member requests for machining needs, and may include the manufacture of complex parts from a variety of materials with exacting tolerances from drawings, sketches, and verbal instructions. The project portfolios that will be supported are diverse, and you must be able to effectively communicate and interact with scientists, engineers, technologists, and technicians in Q-5. You will receive on-the-job training from an experienced Journeyman Machinist and have access to a fully-equipped satellite machine shop located at TA-9. The candidate will participate in the collaborative planning of prototype designs; once finalized, they will perform the fabrication and assembly independently as well as part of a team.
Research Tec 5 $83,900 - $136,600
In addition to what was outlined at the lower level, at this level your will work contribute to the development of new procedures and protocols. You will also recommend solutions to problems affecting project requirements.
High Explosive Science & Technology (Q-5) Group, serves the Laboratory and nation by providing the knowledge base in high explosives (HE) testing for the Nuclear Weapons Program and other national security areas. The group specializes in a broad array of energetic materials science including development (synthesis and formulation) and testing of novel explosives, pilot plant production of explosive materials, advanced manufacturing of explosives, analytical chemistry of explosives and explosives ingredients, detonation performance testing, and special security projects.
This posting is under the Associate Laboratory Directorate for Weapons Engineering (ALDW).
What You Need
Minimum Job Requirements:
Manufacturing Experience
Experience in the design and manufacturing of parts, fixturing, and shot assemblies.
Machine Operations
Experience in the operation and maintenance of manual and CNC machining equipment. Comprehensive understanding of machining processes, tools, operations to obtain various tolerances, and performing precision measurements
Schematics
Fully proficient knowledge and ability to read and interpret engineering drawings
Communication Skills
Strong oral and written communication skills
Additional Job Requirements for Research Tec 5:
In addition to the requirements outlined above, qualification at the higher level requires:
Research & Development Skills
Demonstrated ability to problem solve R&D solutions from design to fabrication.
Prototype Manufacturing Experience
Expert knowledge and experience in prototype machining operations including CNC machining and manual machine tools.
Machine Maintenance Skills
Extensive experience in the testing, maintenance, and troubleshooting of mechanical systems and tooling.
Software Knowledge
CAD/CAM knowledge
Research Tec 4 Education/Experience: Position requires an Associate's Degree and 5 years of related experience; or, an equivalent combination of education and experience directly related to the occupation.
Research Tec 5 Education/Experience: Position requires an Associate's Degree and 7 years of related experience; or, an equivalent combination of education and experience directly related to the occupation.
Desired Qualifications:
Position commitment: Regular appointment employees are required to serve a period of continuous service in their current position in order to be eligible to apply for posted jobs throughout the Laboratory. If an employee has not served the time required, they may only apply for Laboratory jobs with the documented approval of their Division Leader. The position commitment for this position is 1 year.
Note to Applicants: Interested applicants are required to apply online and upload a cover letter and resume. The cover letter must address the candidate experience and how it applies to the opening.
Where You Will Work
Located in beautiful northern New Mexico, Los Alamos National Laboratory (LANL) is a multidisciplinary research institution engaged in strategic science on behalf of national security. Our generous benefits package includes:
§ PPO or High Deductible medical insurance with the same large nationwide network
§ Dental and vision insurance
§ Free basic life and disability insurance
§ Paid childbirth and parental leave
§ Award-winning 401(k) (6% matching plus 3.5% annually)
§ Learning opportunities and tuition assistance
§ Flexible schedules and time off (PTO and holidays)
§ Onsite gyms and wellness programs
§ Extensive relocation packages (outside a 50 mile radius)
Additional Details
Directive 206.2 - Employment with Triad requires a favorable decision by NNSA indicating employee is suitable under NNSA Supplemental Directive 206.2. Please note that this requirement applies only to citizens of the United States. Foreign nationals are subject to a similar requirement under DOE Order 142.3A.
Clearance: Q (Position will be cleared to this level). Selected applicants will be subject to a background investigation conducted by or on behalf of the Federal Government, and must meet eligibility requirements* for access to classified matter. This position requires a Q clearance. and obtaining such clearance requires US Citizenship except in extremely rare circumstances. Dependent upon the position, additional authorization to access classified information may be required, which may or may not be available to dual citizens. Receipt of a Q clearance and additional access authorization ultimately is a decision of the Federal Government and not of Triad.
*Eligibility requirements: To obtain a clearance, an individual must be at least 18 years of age; U.S. citizenship is required except in very limited circumstances. See DOE Order 472.2 for additional information.
New-Employment Drug Test: The Laboratory requires successful applicants to complete a new-employment drug test and maintains a substance abuse policy that includes random drug testing. Although New Mexico and other states have legalized the use of marijuana, use and possession of marijuana remain illegal under federal law. A positive drug test for marijuana will result in termination of employment, even if the use was pre-offer.
Regular position: Term status Laboratory employees applying for regular-status positions are converted to regular status.
Internal Applicants: Regular appointment employees who have served the required period of continuous service in their current position are eligible to apply for posted jobs throughout the Laboratory. If an employee has not served the required period of continuous service, they may only apply for Laboratory jobs with the documented approval of their Division Leader. Please refer to Policy Policy P701 for applicant eligibility requirements.
Equal Opportunity: Los Alamos National Laboratory is an equal opportunity employer and supports a diverse and inclusive workforce. All employment practices are based on qualification and merit, without regard to race, color, national origin, ancestry, religion, age, sex, gender identity, sexual orientation, marital status or spousal affiliation, physical or mental disability, medical conditions, pregnancy, status as a protected veteran, genetic information, or citizenship within the limits imposed by federal laws and regulations. The Laboratory is also committed to making our workplace accessible to individuals with disabilities and will provide reasonable accommodations, upon request, for individuals to participate in the application and hiring process. To request such an accommodation, please send an email to applyhelp@lanl.gov or call 1-505-664-6947 option 2 and then option 3.
This position will be filled at either the Research Tec 4/Research Tec 5 level, depending on the skills of the selected candidate. Additional job responsibilities (outlined below) will be assigned if the candidate is hired at the higher level.
Research Tec 4 $69,500 - $110,300
Join our Team! The High Explosives Science and Technology (Q-5) group is seeking an individual to provide technical support specifically in the area of design, fabrication, and assembly of components used in research and development experiments. You must provide an agile response to group member requests for machining needs, and may include the manufacture of complex parts from a variety of materials with exacting tolerances from drawings, sketches, and verbal instructions. The project portfolios that will be supported are diverse, and you must be able to effectively communicate and interact with scientists, engineers, technologists, and technicians in Q-5. You will receive on-the-job training from an experienced Journeyman Machinist and have access to a fully-equipped satellite machine shop located at TA-9. The candidate will participate in the collaborative planning of prototype designs; once finalized, they will perform the fabrication and assembly independently as well as part of a team.
Research Tec 5 $83,900 - $136,600
In addition to what was outlined at the lower level, at this level your will work contribute to the development of new procedures and protocols. You will also recommend solutions to problems affecting project requirements.
High Explosive Science & Technology (Q-5) Group, serves the Laboratory and nation by providing the knowledge base in high explosives (HE) testing for the Nuclear Weapons Program and other national security areas. The group specializes in a broad array of energetic materials science including development (synthesis and formulation) and testing of novel explosives, pilot plant production of explosive materials, advanced manufacturing of explosives, analytical chemistry of explosives and explosives ingredients, detonation performance testing, and special security projects.
This posting is under the Associate Laboratory Directorate for Weapons Engineering (ALDW).
What You Need
Minimum Job Requirements:
Manufacturing Experience
Experience in the design and manufacturing of parts, fixturing, and shot assemblies.
Machine Operations
Experience in the operation and maintenance of manual and CNC machining equipment. Comprehensive understanding of machining processes, tools, operations to obtain various tolerances, and performing precision measurements
Schematics
Fully proficient knowledge and ability to read and interpret engineering drawings
Communication Skills
Strong oral and written communication skills
Additional Job Requirements for Research Tec 5:
In addition to the requirements outlined above, qualification at the higher level requires:
Research & Development Skills
Demonstrated ability to problem solve R&D solutions from design to fabrication.
Prototype Manufacturing Experience
Expert knowledge and experience in prototype machining operations including CNC machining and manual machine tools.
Machine Maintenance Skills
Extensive experience in the testing, maintenance, and troubleshooting of mechanical systems and tooling.
Software Knowledge
CAD/CAM knowledge
Research Tec 4 Education/Experience: Position requires an Associate's Degree and 5 years of related experience; or, an equivalent combination of education and experience directly related to the occupation.
Research Tec 5 Education/Experience: Position requires an Associate's Degree and 7 years of related experience; or, an equivalent combination of education and experience directly related to the occupation.
Desired Qualifications:
- Journeyman machinist
- High explosives handler qualification
- Qualified to transport high explosives
- Experience machining of pyrophoric materials (i.e. magnesium, titanium, etc)
Position commitment: Regular appointment employees are required to serve a period of continuous service in their current position in order to be eligible to apply for posted jobs throughout the Laboratory. If an employee has not served the time required, they may only apply for Laboratory jobs with the documented approval of their Division Leader. The position commitment for this position is 1 year.
Note to Applicants: Interested applicants are required to apply online and upload a cover letter and resume. The cover letter must address the candidate experience and how it applies to the opening.
Where You Will Work
Located in beautiful northern New Mexico, Los Alamos National Laboratory (LANL) is a multidisciplinary research institution engaged in strategic science on behalf of national security. Our generous benefits package includes:
§ PPO or High Deductible medical insurance with the same large nationwide network
§ Dental and vision insurance
§ Free basic life and disability insurance
§ Paid childbirth and parental leave
§ Award-winning 401(k) (6% matching plus 3.5% annually)
§ Learning opportunities and tuition assistance
§ Flexible schedules and time off (PTO and holidays)
§ Onsite gyms and wellness programs
§ Extensive relocation packages (outside a 50 mile radius)
Additional Details
Directive 206.2 - Employment with Triad requires a favorable decision by NNSA indicating employee is suitable under NNSA Supplemental Directive 206.2. Please note that this requirement applies only to citizens of the United States. Foreign nationals are subject to a similar requirement under DOE Order 142.3A.
Clearance: Q (Position will be cleared to this level). Selected applicants will be subject to a background investigation conducted by or on behalf of the Federal Government, and must meet eligibility requirements* for access to classified matter. This position requires a Q clearance. and obtaining such clearance requires US Citizenship except in extremely rare circumstances. Dependent upon the position, additional authorization to access classified information may be required, which may or may not be available to dual citizens. Receipt of a Q clearance and additional access authorization ultimately is a decision of the Federal Government and not of Triad.
*Eligibility requirements: To obtain a clearance, an individual must be at least 18 years of age; U.S. citizenship is required except in very limited circumstances. See DOE Order 472.2 for additional information.
New-Employment Drug Test: The Laboratory requires successful applicants to complete a new-employment drug test and maintains a substance abuse policy that includes random drug testing. Although New Mexico and other states have legalized the use of marijuana, use and possession of marijuana remain illegal under federal law. A positive drug test for marijuana will result in termination of employment, even if the use was pre-offer.
Regular position: Term status Laboratory employees applying for regular-status positions are converted to regular status.
Internal Applicants: Regular appointment employees who have served the required period of continuous service in their current position are eligible to apply for posted jobs throughout the Laboratory. If an employee has not served the required period of continuous service, they may only apply for Laboratory jobs with the documented approval of their Division Leader. Please refer to Policy Policy P701 for applicant eligibility requirements.
Equal Opportunity: Los Alamos National Laboratory is an equal opportunity employer and supports a diverse and inclusive workforce. All employment practices are based on qualification and merit, without regard to race, color, national origin, ancestry, religion, age, sex, gender identity, sexual orientation, marital status or spousal affiliation, physical or mental disability, medical conditions, pregnancy, status as a protected veteran, genetic information, or citizenship within the limits imposed by federal laws and regulations. The Laboratory is also committed to making our workplace accessible to individuals with disabilities and will provide reasonable accommodations, upon request, for individuals to participate in the application and hiring process. To request such an accommodation, please send an email to applyhelp@lanl.gov or call 1-505-664-6947 option 2 and then option 3.
Source : Los Alamos National Laboratory