Senior Mechanical CAD Designer - General Atomics and Affiliated Companies
Poway, CA
About the Job
General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.
We have an exciting opportunity for a Senior Mechanical Engineering CAD Designer within the Mechanical Engineering Systems Integration Group.
Under general direction with limited review, the successful candidate will design metallic and composite mounting structure for avionics and payloads in remotely piloted aircraft while optimizing fit, function, thermal, manufacturing, maintainability, quality, cost and schedule considerations. Design tasks will range from supporting engineers with detail part design to layouts, subassemblies, large assemblies and installation-level modeling and drawing creation using 3D computer aided design (CAD) software. This position will have opportunities to work in a hands-on environment to create prototype mock-ups and validate packaging solutions on actual aircraft. May coordinate segments of a specific project and may have frequent inter-organization and customer contact on difficult technical issues.
DUTIES AND RESPONSIBILITES
+ Applies technical knowledge to design, investigate and resolve assigned design problems utilizing standard engineering and design standards.
+ Utilizes 3D computer aided design (CAD) software for design solutions and drawings.
+ Demonstrates a thorough understanding of configuration management of large assemblies.
+ Creates documentation and presents engineering changes to the change control board.
+ Performs tolerance analysis and demonstrates thorough understanding of Geometric Dimensioning and Tolerancing.
+ Performs hands-on investigation of problems and validation of solutions.
+ Creates and presents design review documentation to engineering management.
+ Interacts with designers and engineers across multiple disciplines.
+ May direct the activities of lower-level designers.
+ Maintains the strict confidentiality of sensitive information.
+ Responsible for observing all laws, regulations, and other applicable obligations wherever and whenever business is conducted on behalf of the Company. Expected to work in a safe manner in accordance with established operating procedures and practices.
+ Performs other duties as assigned.
We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.44891
Job Qualifications:
+ Typically requires an Associates degree or a certificate from a recognized organization indicating completion of training in ProEngineer/CREO, NX, CATIA or IDEAS design software plus thirteen or more years of progressive experience utilizing CAD software with at least five of those years spent utilizing ProEngineer/CREO, NX, CATIA, IDEAS or related engineering design software. Additional education may be substituted in lieu of work experience.
+ Must have a complete and in-depth understanding of engineering design concepts and principles and possess the ability to understand new concepts quickly, applying them accurately throughout an evolving environment.
+ Must have aptitude and demonstrated design experience utilizing 3D CAD engineering software for design and drawing creation. (CREO or NX preferred).
+ Must be a self-starter, highly motivated, and have mechanical aptitude.
+ Must be able to organize, schedule, and coordinate work phases, and determine the appropriate approach at the task level or project level to provide solutions to a range of complex problems.
+ Must have excellent communication, documentation, presentation, computer, interpersonal and hands-on skills.
+ Must have a working knowledge and application of Microsoft Word, Excel and PowerPoint.
+ Ability to obtain and maintain DOD Security Clearance is required.
+ Must be able to work independently and as part of a team.
Salary: $87,070 - $132,963 Travel Percentage Required 0 - 25 Relocation Assistance Provided Not Provided US Citizenship Required? Yes Clearance Required? Desired Clearance Level Secret Workstyle Onsite
General Atomics is committed to hiring and retaining a diverse workforce. We are an Equal Opportunity/Affirmative Action Employer and will consider all qualified applicants for employment without regard to race, color, religion, religious creed, ancestry, gender, pregnancy, sex, sexual orientation, transitioning status, gender identity, gender expression, national origin, age, genetic information, military and veteran status, marital status, medical condition, mental disability, physical disability, or any other basis protected by local, state, or federal law. EEO is the law. We also prohibit compensation discrimination under all applicable laws. To learn more visit https://tbcdn.talentbrew.com/company/499/v2_0/EEO Notices.pdf. U.S. Citizenship is required for certain positions.
We have an exciting opportunity for a Senior Mechanical Engineering CAD Designer within the Mechanical Engineering Systems Integration Group.
Under general direction with limited review, the successful candidate will design metallic and composite mounting structure for avionics and payloads in remotely piloted aircraft while optimizing fit, function, thermal, manufacturing, maintainability, quality, cost and schedule considerations. Design tasks will range from supporting engineers with detail part design to layouts, subassemblies, large assemblies and installation-level modeling and drawing creation using 3D computer aided design (CAD) software. This position will have opportunities to work in a hands-on environment to create prototype mock-ups and validate packaging solutions on actual aircraft. May coordinate segments of a specific project and may have frequent inter-organization and customer contact on difficult technical issues.
DUTIES AND RESPONSIBILITES
+ Applies technical knowledge to design, investigate and resolve assigned design problems utilizing standard engineering and design standards.
+ Utilizes 3D computer aided design (CAD) software for design solutions and drawings.
+ Demonstrates a thorough understanding of configuration management of large assemblies.
+ Creates documentation and presents engineering changes to the change control board.
+ Performs tolerance analysis and demonstrates thorough understanding of Geometric Dimensioning and Tolerancing.
+ Performs hands-on investigation of problems and validation of solutions.
+ Creates and presents design review documentation to engineering management.
+ Interacts with designers and engineers across multiple disciplines.
+ May direct the activities of lower-level designers.
+ Maintains the strict confidentiality of sensitive information.
+ Responsible for observing all laws, regulations, and other applicable obligations wherever and whenever business is conducted on behalf of the Company. Expected to work in a safe manner in accordance with established operating procedures and practices.
+ Performs other duties as assigned.
We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.44891
Job Qualifications:
+ Typically requires an Associates degree or a certificate from a recognized organization indicating completion of training in ProEngineer/CREO, NX, CATIA or IDEAS design software plus thirteen or more years of progressive experience utilizing CAD software with at least five of those years spent utilizing ProEngineer/CREO, NX, CATIA, IDEAS or related engineering design software. Additional education may be substituted in lieu of work experience.
+ Must have a complete and in-depth understanding of engineering design concepts and principles and possess the ability to understand new concepts quickly, applying them accurately throughout an evolving environment.
+ Must have aptitude and demonstrated design experience utilizing 3D CAD engineering software for design and drawing creation. (CREO or NX preferred).
+ Must be a self-starter, highly motivated, and have mechanical aptitude.
+ Must be able to organize, schedule, and coordinate work phases, and determine the appropriate approach at the task level or project level to provide solutions to a range of complex problems.
+ Must have excellent communication, documentation, presentation, computer, interpersonal and hands-on skills.
+ Must have a working knowledge and application of Microsoft Word, Excel and PowerPoint.
+ Ability to obtain and maintain DOD Security Clearance is required.
+ Must be able to work independently and as part of a team.
Salary: $87,070 - $132,963 Travel Percentage Required 0 - 25 Relocation Assistance Provided Not Provided US Citizenship Required? Yes Clearance Required? Desired Clearance Level Secret Workstyle Onsite
General Atomics is committed to hiring and retaining a diverse workforce. We are an Equal Opportunity/Affirmative Action Employer and will consider all qualified applicants for employment without regard to race, color, religion, religious creed, ancestry, gender, pregnancy, sex, sexual orientation, transitioning status, gender identity, gender expression, national origin, age, genetic information, military and veteran status, marital status, medical condition, mental disability, physical disability, or any other basis protected by local, state, or federal law. EEO is the law. We also prohibit compensation discrimination under all applicable laws. To learn more visit https://tbcdn.talentbrew.com/company/499/v2_0/EEO Notices.pdf. U.S. Citizenship is required for certain positions.
Source : General Atomics and Affiliated Companies