Sterile Processing Service Technician - LanceSoft Inc
Phoenix, AZ 85012
About the Job
DUTIES AND RESPONSIBILITIES OF CONTRACT STERILE PROCESSING SERVICE TECHNICIANS.
a) Personnel provided by the contractor for consideration must be competent and have a functional level of understanding and ability to apply these knowledge, skills, experience, and qualifications to daily work practices.
i) Must have practical knowledge of theory, principles, practice, and techniques of asepsis to prevent the spread of infection.
ii) Must have practical knowledge of microbiology and the principles as they apply to surgical supply operations as they relate to the resistance of microorganisms to external destructive agents such as heat, and chemicals used for sterilization and High-Level Disinfection (HLD).
iii) Must have a working knowledge of standard procedures for steam autoclaving including, but not necessarily limited to:
(1) Biological testing of sterilization efficacy utilizing commercially available incubated biological test vials.
(2) Chemical indicators, internal and external, used for identifying steam sterilization exposure.
(3) Use, purpose, and correct interpretation of the Bowie-Dick test.
(4) Interpretation and proper recording of results of all sterilization tests.
iv) Must have a working knowledge of standard procedures for use of chemical sterilization such as Sterrad, including, but not necessarily limited to:
(1) Biological testing of sterilization efficacy utilizing commercially available incubated biological test vials.
(2) Chemical indicators, internal and external, used for identifying sterilization exposure.
(3) Processes for routine operator maintenance, including replenishment of sterilant cartridges.
(4) Interpretation and proper recording of results of all sterilization tests.
v) Must have a working knowledge of standard procedures for use of HLD systems such as Medivator Advantage, Trophon, and manual HLD utilizing Cidex OPA.
(1) Must be aware of and capable of performing on a routine daily basis all testing and quality assurance procedures associated with the use of these devices and chemicals.
vi) Must have a good working knowledge of the availability, economics, use, operation, maintenance, assembly, and disassembly of the full range of surgical supplies, instruments, equipment, and the specific cleaning, sterilizing, and storage requirements of each.
vii) Must possess a very broad knowledge of all types of surgical and clinical instrumentation. This knowledge must include sufficient working knowledge to be able to identify damaged or broken instruments and be able to find a suitable replacement item if available.
(1) Knowledge of surgical specialty instrumentation must include a minimum of the following specialties:
(a) General; including laparoscopic instrumentation.
(b) Gynecology; including laparoscopic and hysteroscopic instrumentation.
(c) Orthopedics; including arthroscopic instrumentation, total joint arthroplasty, fracture fixation, and soft tissue procedures.
(d) Microscopic surgical instrument care and handling; for example, eye cataract instrumentation.
viii) Must have a thorough familiarity with surgical procedures performed in a hospital Operating Room.
ix) Must have knowledge of medical and surgical terminology, human anatomy, and physiology.
x) Must have a thorough knowledge of aseptic principles and techniques including characteristics of various types of detergents, and cleaning techniques.
xi) Must have knowledge of the proper handling, cleaning, and reprocessing for use of flexible endoscopes such as colonoscopes and gastroscopes.
xii) Must be able to follow detailed, step-by-step instructions provided by the manufacturer for the handling, cleaning, and sterilization or HLD processing of a large variety of surgical and clinical Reusable Medical Equipment (RME).
xiii) Must be capable of performing all physical demands of the SPS department including but not limited to:
(1) Prolonged standing, frequently as much as 8 hours per duty day with normal rest and meal breaks.
(2) Frequent lifting of instrument baskets weighing up to 25 pounds and occasional lifting of objects up to 50 pounds.
(3) Frequent pushing and pulling of carts weighing several hundred pounds.
(4) Frequent and repetitive bending to floor level. Frequent and repetitive lifting above the shoulders, with occasional lifts above the head.
xiv) Must be able to read, write, and understand the English language.
xv) Must be capable of working in a loud environment with occasional very loud noises.
xvi) Must be capable of wearing required Personal Protective Equipment (PPE) for 8 hours of a duty day with normal rest and meal breaks.
xvii) Must be capable of working in a hot and humid environment while wearing PPE.
xviii) Must be capable of performing repetitive work for long periods of time.
xix) Must be flexible and able to change tasks at a moment’s notice.
WORK SCHEDULE.
a) Contract Sterile Processing Service Technician staff shall work in areas designated by the COR or his/her designated representative.
b) Contract Sterile Processing Service Technicians weekly hours can range from eight (8) to forty (40) hours per week.
c) Contract Sterile Processing Service Technicians shall be available Monday-Sunday with five possible Tour of Duties:
i) Tour 1 – 6:00am – 2:30pm
ii) Tour 2 – 8:00am – 4:30pm
iii) Tour 3 – 2:30pm – 11:00pm
iv) Tour 4 – 3:30pm – 12:00am
v) Tour 5 – 9:00pm – 5:30am
d) Contract Sterile Processing Service Technicians may rotate shifts as needed.
e) There is no work in excess of 8 hours permitted on the resulting contract.
f) Contract Sterile Processing Service Technician staff that works a six (6) hour, or longer, shift shall be entitled to an unpaid thirty (30) minute meal break.
g) The Government reserves the right to schedule or reschedule duty hours to meet staffing and patient care needs. The Government shall provide a twenty-four (24) hour notice of any schedule changes. The Contractor shall be responsible for the overall provision of coverage within the timeframes annotated above without exception.
h) Contract Sterile Processing Service Technician staff shall be present at the facility and shall be performing the required services to receive payment for services. The Contract Sterile Processing Service Technician staff shall only receive payment for the actual number of hours worked on-site.
NATIONAL HOLIDAYS.
a) When one of the holidays falls on a Sunday, the following Monday will be observed as a national holiday. When a holiday falls on a Saturday, the preceding Friday is observed as a national holiday by U.S. Government Agencies. Also included would be any day specifically declared by the President of the United States of America as a national holiday. The Contractor shall only be paid for actual hours worked. Holiday pay is not authorized under the resultant Contract and subsequent orders.
a) Personnel provided by the contractor for consideration must be competent and have a functional level of understanding and ability to apply these knowledge, skills, experience, and qualifications to daily work practices.
i) Must have practical knowledge of theory, principles, practice, and techniques of asepsis to prevent the spread of infection.
ii) Must have practical knowledge of microbiology and the principles as they apply to surgical supply operations as they relate to the resistance of microorganisms to external destructive agents such as heat, and chemicals used for sterilization and High-Level Disinfection (HLD).
iii) Must have a working knowledge of standard procedures for steam autoclaving including, but not necessarily limited to:
(1) Biological testing of sterilization efficacy utilizing commercially available incubated biological test vials.
(2) Chemical indicators, internal and external, used for identifying steam sterilization exposure.
(3) Use, purpose, and correct interpretation of the Bowie-Dick test.
(4) Interpretation and proper recording of results of all sterilization tests.
iv) Must have a working knowledge of standard procedures for use of chemical sterilization such as Sterrad, including, but not necessarily limited to:
(1) Biological testing of sterilization efficacy utilizing commercially available incubated biological test vials.
(2) Chemical indicators, internal and external, used for identifying sterilization exposure.
(3) Processes for routine operator maintenance, including replenishment of sterilant cartridges.
(4) Interpretation and proper recording of results of all sterilization tests.
v) Must have a working knowledge of standard procedures for use of HLD systems such as Medivator Advantage, Trophon, and manual HLD utilizing Cidex OPA.
(1) Must be aware of and capable of performing on a routine daily basis all testing and quality assurance procedures associated with the use of these devices and chemicals.
vi) Must have a good working knowledge of the availability, economics, use, operation, maintenance, assembly, and disassembly of the full range of surgical supplies, instruments, equipment, and the specific cleaning, sterilizing, and storage requirements of each.
vii) Must possess a very broad knowledge of all types of surgical and clinical instrumentation. This knowledge must include sufficient working knowledge to be able to identify damaged or broken instruments and be able to find a suitable replacement item if available.
(1) Knowledge of surgical specialty instrumentation must include a minimum of the following specialties:
(a) General; including laparoscopic instrumentation.
(b) Gynecology; including laparoscopic and hysteroscopic instrumentation.
(c) Orthopedics; including arthroscopic instrumentation, total joint arthroplasty, fracture fixation, and soft tissue procedures.
(d) Microscopic surgical instrument care and handling; for example, eye cataract instrumentation.
viii) Must have a thorough familiarity with surgical procedures performed in a hospital Operating Room.
ix) Must have knowledge of medical and surgical terminology, human anatomy, and physiology.
x) Must have a thorough knowledge of aseptic principles and techniques including characteristics of various types of detergents, and cleaning techniques.
xi) Must have knowledge of the proper handling, cleaning, and reprocessing for use of flexible endoscopes such as colonoscopes and gastroscopes.
xii) Must be able to follow detailed, step-by-step instructions provided by the manufacturer for the handling, cleaning, and sterilization or HLD processing of a large variety of surgical and clinical Reusable Medical Equipment (RME).
xiii) Must be capable of performing all physical demands of the SPS department including but not limited to:
(1) Prolonged standing, frequently as much as 8 hours per duty day with normal rest and meal breaks.
(2) Frequent lifting of instrument baskets weighing up to 25 pounds and occasional lifting of objects up to 50 pounds.
(3) Frequent pushing and pulling of carts weighing several hundred pounds.
(4) Frequent and repetitive bending to floor level. Frequent and repetitive lifting above the shoulders, with occasional lifts above the head.
xiv) Must be able to read, write, and understand the English language.
xv) Must be capable of working in a loud environment with occasional very loud noises.
xvi) Must be capable of wearing required Personal Protective Equipment (PPE) for 8 hours of a duty day with normal rest and meal breaks.
xvii) Must be capable of working in a hot and humid environment while wearing PPE.
xviii) Must be capable of performing repetitive work for long periods of time.
xix) Must be flexible and able to change tasks at a moment’s notice.
WORK SCHEDULE.
a) Contract Sterile Processing Service Technician staff shall work in areas designated by the COR or his/her designated representative.
b) Contract Sterile Processing Service Technicians weekly hours can range from eight (8) to forty (40) hours per week.
c) Contract Sterile Processing Service Technicians shall be available Monday-Sunday with five possible Tour of Duties:
i) Tour 1 – 6:00am – 2:30pm
ii) Tour 2 – 8:00am – 4:30pm
iii) Tour 3 – 2:30pm – 11:00pm
iv) Tour 4 – 3:30pm – 12:00am
v) Tour 5 – 9:00pm – 5:30am
d) Contract Sterile Processing Service Technicians may rotate shifts as needed.
e) There is no work in excess of 8 hours permitted on the resulting contract.
f) Contract Sterile Processing Service Technician staff that works a six (6) hour, or longer, shift shall be entitled to an unpaid thirty (30) minute meal break.
g) The Government reserves the right to schedule or reschedule duty hours to meet staffing and patient care needs. The Government shall provide a twenty-four (24) hour notice of any schedule changes. The Contractor shall be responsible for the overall provision of coverage within the timeframes annotated above without exception.
h) Contract Sterile Processing Service Technician staff shall be present at the facility and shall be performing the required services to receive payment for services. The Contract Sterile Processing Service Technician staff shall only receive payment for the actual number of hours worked on-site.
NATIONAL HOLIDAYS.
a) When one of the holidays falls on a Sunday, the following Monday will be observed as a national holiday. When a holiday falls on a Saturday, the preceding Friday is observed as a national holiday by U.S. Government Agencies. Also included would be any day specifically declared by the President of the United States of America as a national holiday. The Contractor shall only be paid for actual hours worked. Holiday pay is not authorized under the resultant Contract and subsequent orders.
Source : LanceSoft Inc
