SUPERVISORY INTERDISCIPLINARY GENERAL ENGINEER/ARCHITECT - Naval Facilities Engineering Command

Summary You will serve as a SUPERVISORY ENGINEER/ARCHITECT in the field of Construction engineering in the Capital Improvements Business line of NAVAL FACILITIES ENG COMMAND ATLANTIC. This is an interdisciplinery position and can be filled with either the Engineer 0801 or Architect 0808 series. Responsibilities You will serve as a point of contact for coordination of all assigned construction projects at DOD activities, under the cognizance of the Naval Facilities Engineering Command. You will resolve complaints from individual employees, resolves group grievances, investigate serious complaints and involves HRO as necessary to ensure timely and effective conflict resolution. You will manage programs and projects in the product line in a timely manner and accomplish objectives within resource constraints. You will evaluate performance of subordinates and ensure timely performance of subordinates of a satisfactory quality of work. You will enforce all technical and administrative provisions (which typically involve several engineering disciplines) related to the management of assigned construction contracts. Requirements Conditions of Employment Qualifications This position has a Special Placement Factor which is current registration as a Professional Engineer (PE) or Architect (RA) in any state, District of Columbia, Guam or Puerto Rico. In addition to the Basic Requirements for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the GS-12 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: 1) Providing supervision, assistance and guidance involving construction management services concerning contracts related to facilities construction, repair and maintenance; 2) Utilizing knowledge of advanced concepts, principles, and practices in engineering/architecture to advise and serve as an expert level in the area of construction; 3) Establishing and monitoring site and project specific procedures and submission of reports aimed at expediting the work of A/E and construction contractors: and 4) Assisting in and/or seeking out solutions to problems involving the areas of all disciplines of engineering and project financing which are the result of design errors, unforeseen conditions, or changes. Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/general-engineering-series-0801/ https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/architecture-series-0808/ Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Physical Demands: The work is generally sedentary with regular site visits involving standing, walking, climbing, bending and crawling to assess or inspect existing and new facilities and generally traversing construction sites. Occasional surveys and inspections of the supporting Installation's infrastructure will require some physical exertion (for example, crawlspace inspections, above and below deck pier evaluations, etc.). A valid driver's license is required for driving to site visits and meetings at various installations. Work Environment: Work generally involves minimal risks and observance of safety precautions typical of an office setting. However, field inspections are made which may require protective clothing. Protective clothing worn in field inspections includes hard hats, reflective vest, hard-toed boots, safety glasses, and ear protection. Other protective wear such as safety harnesses, coveralls, and gloves may be required for certain situations. The incumbent may be assigned to work in areas where certain potentially harmful physical and chemical agents are present. These agents may include but are not limited to: fumes, dust, noise, heat, ionizing and non-ionizing radiation, chemicals, etc. To ensure employee safety and health, NAVFAC FECs maintain personnel protection programs with applicable laws and regulations. These programs may include protective equipment, and laws and medical surveillance. Education Series 0801 Engineer Applicants for the Professional Engineering Series must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position. OR Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org OR Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html. OR Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above) OR Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. Series 0808 Applicants for the Professional Architecture Series must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Successful completion of a bachelor's or higher degree in architecture. OR Successful completion of a bachelor's or higher degree in a field related to architecture that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems. OR Have a combination of college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The curriculum for a degree is in either architecture or architectural engineering and covers function, esthetics, site, structure, economics, mechanical-electrical, and other engineering problems related to the design and construction of buildings primarily (but not exclusively) intended to house human activities OR you lack a degree in architecture, but have 1 year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture that demonstrates that you have acquired a thorough knowledge of the fundamental principles and theories of professional architecture. (Note - In the absence of college courses, 5 years of such experience is required). Additional Information This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. If you are unable to apply online and request information about the Alternate Application process, please contact the Department of Navy's Employment Information Center. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf ICTAP Applicants: To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higher. ICTAP candidates must provide copies of all of the following documentation at the time of application: 1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty location. Applicants who do not provide this documentation will not receive consideration as an ICTAP candidate. For more information about ICTAP eligibility please review the following link: https://www.usajobs.gov/Help/working-in-government/unique-hiring-paths/federal-employees/career-transition/ Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position. PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation.