Technician - PDS Defense
Orlando, FL
About the Job
Light Industrial/Manufacturing
Technician Orlando, FL Posted: 10/8/2024
Job Description
Job ID#:
208464
Job Category:
Light Industrial/Manufacturing
Position Type:
Associate - W2
Duration:
53
Shift:
1
PDS Defense, Inc. is seeking a Technician, in Orlando, FL. Job ID#208464
Job Description:
-This position will fabricate test equipment that will be used in the development and manufacture of tactical hardware.
-The position will be responsible for reading, interpreting, and occasionally correcting engineering drawings/schematics.
-The test equipment fabricated can include test sets, test boxes, cables, and other assemblies or subassemblies.
-The candidate will be expected to place and solder components on circuit cards and subassemblies.
-The fabrication of wiring harnesses will require connector pinning and depinning, and applying mounting hardware.
-In addition, these lower level assemblies are to be built-up into single, or multi-bay cabinet assemblies, for the delivery to Engineering or Manufacturing Production areas.
-This position will provide the opportunity for the candidate to work as an individual contributor, in a team environment.
-This would include collaborating with Engineers, and other members of the Fabrication team including other Fabricators, Draftsmen, Procurement, and Quality Inspectors.
-Daily activity would include not only a fast-paced fabrication environment, but it would also include using several computer based programs that will update job status, Quality Inspections, and Engineering changes.
-This position is expected to operate under moderate supervision.
This position is a minimum of 40 hours per week commitment with occasional overtime required.
Basic Requirements:
* At least 5 years of experience in electrical fabrication (cable and harness, SMT board, test equipment, etc.)
* Ability to properly safety wire assemblies and connectors
* Ability to solder and repair cables and harnesses
* Basic knowledge of Microsoft Office suite of programs
* Strong knowledge and experience in repairs of electro-mechanical assemblies
* Knowledge basic avionics and electronics
* Knowledge of troubleshooting and fault isolation of components using general purpose and/or automated test equipment
* Knowledge of automated and/or general-purpose test equipment (oscilloscopes, multi-meters, network analyzers and waveform generators)
* Knowledge of the interpretation of engineering drawings, schematics, and test and repair procedures
* Ability to fabricate electrical test equipment designs from a blueprint of the layout, schematic, bill of material, and engineering practices manual as guidelines.
* Ability to communicate issues with the design and or the process requirements to management and or design engineers.
* Familiarity with industrial standards, military specifications and industry processes
* Excellent written and verbal communication skills
* Ability to lift 35 pounds.
* Ability to adapt to dynamic and frequently changing customer requirements
* Ability to understand policies and procedures for the control of Government property
* Ability to work with hazardous materials
* High school diploma
Desired Skills
* Knowledge of solder certification to J-STD-001, IPC-7711/IPC-7721
* Knowledge of fault isolation for electro-mechanical components
* Knowledge of concepts for hardware repair.
* Experience with CCA component rework and repair
* Rework experience with BGAs and electrical maintenance and rework
Benefits offered to vary by the contract. Depending on your temporary assignment, benefits may include direct deposit, free career counseling services, 401(k), select paid holidays, short-term disability insurance, skills training, employee referral bonus, affordable medical coverage plan, and DailyPay (in some locations). For a full description of benefits available to you, be sure to talk with your recruiter.
Job Requirements
Minimum Security Clearance:
No Clearance
VEVRAA Federal Contractor / Request Priority Protected Veteran Referrals / Equal Opportunity Employer / Veterans / Disabled
To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit http://www.tadpgs.com/candidate-privacy/ or https://pdsdefense.com/candidate-privacy/
The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:
+ The California Fair Chance Act
+ Los Angeles City Fair Chance Ordinance
+ Los Angeles County Fair Chance Ordinance for Employers
+ San Francisco Fair Chance Ordinance
VEVRAA Federal Contractor / Request Priority Protected Veteran Referrals / Equal Opportunity Employer / Veterans / Disabled
Technician Orlando, FL Posted: 10/8/2024
Job Description
Job ID#:
208464
Job Category:
Light Industrial/Manufacturing
Position Type:
Associate - W2
Duration:
53
Shift:
1
PDS Defense, Inc. is seeking a Technician, in Orlando, FL. Job ID#208464
Job Description:
-This position will fabricate test equipment that will be used in the development and manufacture of tactical hardware.
-The position will be responsible for reading, interpreting, and occasionally correcting engineering drawings/schematics.
-The test equipment fabricated can include test sets, test boxes, cables, and other assemblies or subassemblies.
-The candidate will be expected to place and solder components on circuit cards and subassemblies.
-The fabrication of wiring harnesses will require connector pinning and depinning, and applying mounting hardware.
-In addition, these lower level assemblies are to be built-up into single, or multi-bay cabinet assemblies, for the delivery to Engineering or Manufacturing Production areas.
-This position will provide the opportunity for the candidate to work as an individual contributor, in a team environment.
-This would include collaborating with Engineers, and other members of the Fabrication team including other Fabricators, Draftsmen, Procurement, and Quality Inspectors.
-Daily activity would include not only a fast-paced fabrication environment, but it would also include using several computer based programs that will update job status, Quality Inspections, and Engineering changes.
-This position is expected to operate under moderate supervision.
This position is a minimum of 40 hours per week commitment with occasional overtime required.
Basic Requirements:
* At least 5 years of experience in electrical fabrication (cable and harness, SMT board, test equipment, etc.)
* Ability to properly safety wire assemblies and connectors
* Ability to solder and repair cables and harnesses
* Basic knowledge of Microsoft Office suite of programs
* Strong knowledge and experience in repairs of electro-mechanical assemblies
* Knowledge basic avionics and electronics
* Knowledge of troubleshooting and fault isolation of components using general purpose and/or automated test equipment
* Knowledge of automated and/or general-purpose test equipment (oscilloscopes, multi-meters, network analyzers and waveform generators)
* Knowledge of the interpretation of engineering drawings, schematics, and test and repair procedures
* Ability to fabricate electrical test equipment designs from a blueprint of the layout, schematic, bill of material, and engineering practices manual as guidelines.
* Ability to communicate issues with the design and or the process requirements to management and or design engineers.
* Familiarity with industrial standards, military specifications and industry processes
* Excellent written and verbal communication skills
* Ability to lift 35 pounds.
* Ability to adapt to dynamic and frequently changing customer requirements
* Ability to understand policies and procedures for the control of Government property
* Ability to work with hazardous materials
* High school diploma
Desired Skills
* Knowledge of solder certification to J-STD-001, IPC-7711/IPC-7721
* Knowledge of fault isolation for electro-mechanical components
* Knowledge of concepts for hardware repair.
* Experience with CCA component rework and repair
* Rework experience with BGAs and electrical maintenance and rework
Benefits offered to vary by the contract. Depending on your temporary assignment, benefits may include direct deposit, free career counseling services, 401(k), select paid holidays, short-term disability insurance, skills training, employee referral bonus, affordable medical coverage plan, and DailyPay (in some locations). For a full description of benefits available to you, be sure to talk with your recruiter.
Job Requirements
Minimum Security Clearance:
No Clearance
VEVRAA Federal Contractor / Request Priority Protected Veteran Referrals / Equal Opportunity Employer / Veterans / Disabled
To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit http://www.tadpgs.com/candidate-privacy/ or https://pdsdefense.com/candidate-privacy/
The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:
+ The California Fair Chance Act
+ Los Angeles City Fair Chance Ordinance
+ Los Angeles County Fair Chance Ordinance for Employers
+ San Francisco Fair Chance Ordinance
VEVRAA Federal Contractor / Request Priority Protected Veteran Referrals / Equal Opportunity Employer / Veterans / Disabled
Source : PDS Defense