Ultrasonic Inspector (Level II UT, ET) - Textron
Grand Prairie, TX
About the Job
Ultrasonic Inspector (Level II UT, ET)
Description
Work Performed:
Inspects all types of metal alloy materials, castings, forgings and machined parts for defects, flaws and other internal discontinuities by means of operation of equipment, performance and interpretation by ultrasonic methods.
Determines quality of materials and parts by correlation of flaw indication with actual geometry, size and position.
Analyzes factors influencing flaw indications.
Sets up, calibrates and operates ultrasonic testing and inspection equipment.
Adjusts controls, selects proper size and type of transducers, establishes proper frequency and inspects by immersion scanning or contact scanning method.
Determines type of defects found and determines depth, angulation and size of defect and form and condition of material.
Required to establish effective ultrasonic inspection techniques and interpret indications and readings shown on oscilloscope or equivalent device in an accurate and dependable manner to obtain optimum results of ultrasonic testing inspection.
Rejects all work, which fails to meet required standards or specifications.
May be required to use portable equipment, work aids, devise holding devices and work aids necessary in the performance of this job and direct the activities of other inspectors or operators in ultrasonic inspection or testing.
Maintains adequate and proper records and prepares reports as required.
Must pass required Armed Services Tests for ultrasonic equipment operation and inspection.
Tools & Equipment Used: All types of ultrasonic testing and inspection machines and equipment, inspector hand and marking tools, and a variety of special equipment necessary to performed required work.
Qualifications
Experience & Other Requirements: Three years ultrasonic inspection and testing experience.
Must pass Armed Services Tests for ultrasonic equipment operation and inspection.
Textron is an Equal Opportunity Employer (M/F/D/V)
This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. Green Card Holder), Political Asylee, or Refugee.
Textron (and its subsidiaries) participates in E-Verify. We will provide the U.S. Social Security Administration (SSA) and, if necessary, the U.S. Department of Homeland Security (DHS), with information from each new employees Form I-9 to confirm work authorization.
EEO Statement
Textron is committed to providing Equal Opportunity in Employment, to all applicants and employees regardless of, race, color, religion, gender, age, national origin, military status, veteran status, handicap, physical or mental disability, sexual orientation, gender identity, genetic information or any other characteristic protected by law.
This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR) and/or the Export Administration Regulations (EAR)., Non-U.S. persons selected must meet eligibility requirements for access to export-restricted information. , The ITAR/EAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.
Preference given to Veterans of the U. S. Armed Forces.
Recruiting Company: Bell Textron Inc.
Primary Location: US-Texas-Grand Prairie
Other Locations: US-Texas-Fort Worth
Job Function: Manufacturing
Schedule: Full-time
Job Level: Individual Contributor
Job Type: Experienced
Shift: First Shift
Relocation: Unavailable
Job Posting: 09/20/2024, 5:46:41 PM
Job Number: 325857
Description
Work Performed:
Inspects all types of metal alloy materials, castings, forgings and machined parts for defects, flaws and other internal discontinuities by means of operation of equipment, performance and interpretation by ultrasonic methods.
Determines quality of materials and parts by correlation of flaw indication with actual geometry, size and position.
Analyzes factors influencing flaw indications.
Sets up, calibrates and operates ultrasonic testing and inspection equipment.
Adjusts controls, selects proper size and type of transducers, establishes proper frequency and inspects by immersion scanning or contact scanning method.
Determines type of defects found and determines depth, angulation and size of defect and form and condition of material.
Required to establish effective ultrasonic inspection techniques and interpret indications and readings shown on oscilloscope or equivalent device in an accurate and dependable manner to obtain optimum results of ultrasonic testing inspection.
Rejects all work, which fails to meet required standards or specifications.
May be required to use portable equipment, work aids, devise holding devices and work aids necessary in the performance of this job and direct the activities of other inspectors or operators in ultrasonic inspection or testing.
Maintains adequate and proper records and prepares reports as required.
Must pass required Armed Services Tests for ultrasonic equipment operation and inspection.
Tools & Equipment Used: All types of ultrasonic testing and inspection machines and equipment, inspector hand and marking tools, and a variety of special equipment necessary to performed required work.
Qualifications
Experience & Other Requirements: Three years ultrasonic inspection and testing experience.
Must pass Armed Services Tests for ultrasonic equipment operation and inspection.
Textron is an Equal Opportunity Employer (M/F/D/V)
This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. Green Card Holder), Political Asylee, or Refugee.
Textron (and its subsidiaries) participates in E-Verify. We will provide the U.S. Social Security Administration (SSA) and, if necessary, the U.S. Department of Homeland Security (DHS), with information from each new employees Form I-9 to confirm work authorization.
EEO Statement
Textron is committed to providing Equal Opportunity in Employment, to all applicants and employees regardless of, race, color, religion, gender, age, national origin, military status, veteran status, handicap, physical or mental disability, sexual orientation, gender identity, genetic information or any other characteristic protected by law.
This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR) and/or the Export Administration Regulations (EAR)., Non-U.S. persons selected must meet eligibility requirements for access to export-restricted information. , The ITAR/EAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.
Preference given to Veterans of the U. S. Armed Forces.
Recruiting Company: Bell Textron Inc.
Primary Location: US-Texas-Grand Prairie
Other Locations: US-Texas-Fort Worth
Job Function: Manufacturing
Schedule: Full-time
Job Level: Individual Contributor
Job Type: Experienced
Shift: First Shift
Relocation: Unavailable
Job Posting: 09/20/2024, 5:46:41 PM
Job Number: 325857
Source : Textron